LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> F-150 FX4, 2D Pickup >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Information System And Entertainment System (4.2 Inch Display) DTCS >> Audio Front Control Module (ACM)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Audio Front Control Module (ACM)

DTC INDEX

DTC Description Action
B1A01:01 Speaker #1: General Electrical Failure
B1A01:11 Speaker #1: Circuit Short to Ground
B1A01:12 Speaker #1: Circuit Short to Battery
B1A01:13 Speaker #1: Circuit Open
B1A02:01 Speaker #2: General Electrical Failure
B1A02:11 Speaker #2: Circuit Short to Ground
B1A02:12 Speaker #2: Circuit Short to Battery
B1A02:13 Speaker #2: Circuit Open
B1A03:01 Speaker #3: General Electrical Failure GO to PINPOINT TEST J .
B1A03:11 Speaker #3: Circuit Short to Ground GO to PINPOINT TEST J .
B1A03:12 Speaker #3: Circuit Short to Battery GO to PINPOINT TEST J .
B1A03:13 Speaker #3: Circuit Open GO to PINPOINT TEST J .
B1A04:01 Speaker #4: General Electrical Failure GO to PINPOINT TEST K .
B1A04:11 Speaker #4: Circuit Short to Ground GO to PINPOINT TEST K .
B1A04:12 Speaker #4: Circuit Short to Battery GO to PINPOINT TEST K .
B1A04:13 Speaker #4: Circuit Open GO to PINPOINT TEST K .
B1A56:21 Antenna: Signal Amplitude < Minimum If DTC B1A56:21 sets after running the bezel diagnostic tests, disregard this DTC. This test is used for end of line or repair bay testing at the Ford plant. Each plant has its own assigned frequency and signal strength requirements. The running and passing of this test depends on local radio stations. If no local station is broadcasting on the required frequency, the test will fail. Therefore, tests ran from the bezel diagnostic screen and the DTC generated from the test can be disregarded.
B1A89:11 Satellite Antenna: Circuit Short To Ground GO to PINPOINT TEST B .
B1A89:13 Satellite Antenna: Circuit Open GO to PINPOINT TEST B .
B1D19:49 Compact Disc Unit: Internal Electronic Failure
  • CLEAR the DTC.
  • WAIT at least 30 seconds.
  • REPEAT the self-test.
  • If DTC B1D19:49 is retrieved again, INSTALL a new ACM  . REFER to AUDIO CONTROL MODULE (ACM) .
B1D19:4B Compact Disc Unit: Over Temperature The ACM  was over temperature. This may occur during extended use. Audio operation can resume after the ACM  cools. CLEAR the DTC. This is normal operation.
U0155:00 Lost Communication With Instrument Panel Cluster (IPC  ) Control Module: No Sub Type Information GO to PINPOINT TEST AA .
U0253:00 Lost Communication With Accessory Protocol Interface Module: No Sub Type Information GO to PINPOINT TEST AC .
U0256:00 Lost Communication With Front Controls Interface Module "A": No Sub Type Information GO to PINPOINT TEST AD .
U0257:00 Lost Communication With Front Controls/Display Interface Module: No Sub Type Information GO to PINPOINT TEST AE .
U201A:51 Control Module Main Calibration Data: Not Programmed CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI  procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI  procedure as directed by the diagnostic scan tool. For more information, REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
If there have been no recent service actions, INSTALL a new ACM  to correct the failure to retain configuration data. REFER to AUDIO CONTROL MODULE (ACM) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI  procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI  procedure as directed by the diagnostic scan tool. For more information, REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
If there have been no recent service actions, INSTALL a new ACM  to correct the failure to retain configuration data. REFER to AUDIO CONTROL MODULE (ACM) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI  procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI  procedure as directed by the diagnostic scan tool. For more information, REFER to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
If there have been no recent service actions, INSTALL a new ACM  to correct the failure to retain configuration data. REFER to AUDIO CONTROL MODULE (ACM) .
U3000:41 Control Module: General Checksum Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:41 is retrieved again, INSTALL a new ACM  . REFER to AUDIO CONTROL MODULE (ACM) .
U3000:42 Control Module: General Memory Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:42 is retrieved again, INSTALL a new ACM  . REFER to AUDIO CONTROL MODULE (ACM) .
U3000:96 Control Module: Component Internal Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC U3000:96 is retrieved again, INSTALL a new ACM  . REFER to AUDIO CONTROL MODULE (ACM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AF .
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AG .
scientia non olet · About LEMON Manuals