Restraints Control Module (RCM)
DTC INDEX
| DTC | Description | Action To Take |
|---|---|---|
| Continuous lamp | The Air Bag Warning Indicator is Illuminated Continuously | GO to PINPOINT TEST A . |
| B0001:11 | Driver Frontal Stage 1 Deployment Control: Circuit Short to Ground | GO to PINPOINT TEST B . |
| B0001:12 | Driver Frontal Stage 1 Deployment Control: Circuit Short to Battery | GO to PINPOINT TEST B . |
| B0001:13 | Driver Frontal Stage 1 Deployment Control: Circuit Open | GO to PINPOINT TEST B . |
| B0001:1A | Driver Frontal Stage 1 Deployment Control: Circuit Resistance Below Threshold | GO to PINPOINT TEST B . |
| B0001:2B | Driver Frontal Stage 1 Deployment Control: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0001:4A | Driver Frontal Stage 1 Deployment Control: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0002:11 | Driver Frontal Stage 2 Deployment Control: Circuit Short to Ground | GO to PINPOINT TEST C . |
| B0002:12 | Driver Frontal Stage 2 Deployment Control: Circuit Short to Battery | GO to PINPOINT TEST C . |
| B0002:13 | Driver Frontal Stage 2 Deployment Control: Circuit Open | GO to PINPOINT TEST C . |
| B0002:1A | Driver Frontal Stage 2 Deployment Control: Circuit Resistance Below Threshold | GO to PINPOINT TEST C . |
| B0002:2B | Driver Frontal Stage 2 Deployment Control: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0002:4A | Driver Frontal Stage 2 Deployment Control: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0004:11 | Driver Knee Bolster Deployment Control: Circuit Short to Ground |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT Programmable Module Installation (PMI). Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0004:12 | Driver Knee Bolster Deployment Control: Circuit Short to Battery |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0004:13 | Driver Knee Bolster Deployment Control: Circuit Open |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0004:1A | Driver Knee Bolster Deployment Control: Circuit Resistance Below Threshold |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0004:2B | Driver Knee Bolster Deployment Control: Signal Cross Coupled |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0004:4A | Driver Knee Bolster Deployment Control: Incorrect Component Installed |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0005:11 | Collapsible Steering Column Deployment Control: Circuit Short to Ground |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0005:12 | Collapsible Steering Column Deployment Control: Circuit Short to Battery |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0005:13 | Collapsible Steering Column Deployment Control: Circuit Open |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0005:1A | Collapsible Steering Column Deployment Control: Circuit Resistance Below Threshold |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0005:2B | Collapsible Steering Column Deployment Control: Signal Cross Coupled |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0005:4A | Collapsible Steering Column Deployment Control: Incorrect Component Installed |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0010:11 | Passenger Frontal Stage 1 Deployment Control: Circuit Short to Ground | GO to PINPOINT TEST D . |
| B0010:12 | Passenger Frontal Stage 1 Deployment Control: Circuit Short to Battery | GO to PINPOINT TEST D . |
| B0010:13 | Passenger Frontal Stage 1 Deployment Control: Circuit Open | GO to PINPOINT TEST D . |
| B0010:1A | Passenger Frontal Stage 1 Deployment Control: Circuit Resistance Below Threshold | GO to PINPOINT TEST D . |
| B0010:2B | Passenger Frontal Stage 1 Deployment Control: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0010:4A | Passenger Frontal Stage 1 Deployment Control: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0011:11 | Passenger Frontal Stage 2 Deployment Control: Circuit Short to Ground | GO to PINPOINT TEST E . |
| B0011:12 | Passenger Frontal Stage 2 Deployment Control: Circuit Short to Battery | GO to PINPOINT TEST E . |
| B0011:13 | Passenger Frontal Stage 2 Deployment Control: Circuit Open | GO to PINPOINT TEST E . |
| B0011:1A | Passenger Frontal Stage 2 Deployment Control: Circuit Resistance Below Threshold | GO to PINPOINT TEST E . |
| B0011:2B | Passenger Frontal Stage 2 Deployment Control: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0011:4A | Passenger Frontal Stage 2 Deployment Control: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0020:11 | Left Side Airbag Deployment Control: Circuit Short to Ground | GO to PINPOINT TEST F . |
| B0020:12 | Left Side Airbag Deployment Control: Circuit Short to Battery | GO to PINPOINT TEST F . |
| B0020:13 | Left Side Airbag Deployment Control: Circuit Open | GO to PINPOINT TEST F . |
| B0020:1A | Left Side Airbag Deployment Control 1: Circuit Resistance Below Threshold | GO to PINPOINT TEST F . |
| B0020:2B | Left Side Airbag Deployment Control: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0020:4A | Left Side Airbag Deployment Control: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0021:11 | Left Curtain Deployment Control 1: Circuit Short to Ground | GO to PINPOINT TEST G . |
| B0021:12 | Left Curtain Deployment Control 1: Circuit Short to Battery | GO to PINPOINT TEST G . |
| B0021:13 | Left Curtain Deployment Control 1: Circuit Open | GO to PINPOINT TEST G . |
| B0021:1A | Left Curtain Deployment Control 1: Circuit Resistance Below Threshold | GO to PINPOINT TEST G . |
| B0021:2B | Left Curtain Deployment Control 1: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0021:4A | Left Curtain Deployment Control 1: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0028:11 | Right Side Airbag Deployment Control: Circuit Short to Ground | GO to PINPOINT TEST H . |
| B0028:12 | Right Side Airbag Deployment Control: Circuit Short to Battery | GO to PINPOINT TEST H . |
| B0028:13 | Right Side Airbag Deployment Control: Circuit Open | GO to PINPOINT TEST H . |
| B0028:1A | Right Side Airbag Deployment Control 1: Circuit Resistance Below Threshold | GO to PINPOINT TEST H . |
| B0028:2B | Right Side Airbag Deployment Control: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0028:4A | Right Side Airbag Deployment Control: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0029:11 | Right Curtain Deployment Control 1: Circuit Short to Ground | GO to PINPOINT TEST I . |
| B0029:12 | Right Curtain Deployment Control 1: Circuit Short to Battery | GO to PINPOINT TEST I . |
| B0029:13 | Right Curtain Deployment Control 1: Circuit Open | GO to PINPOINT TEST I . |
| B0029:1A | Right Curtain Deployment Control 1: Circuit Resistance Below Threshold | GO to PINPOINT TEST I . |
| B0029:2B | Right Curtain Deployment Control 1: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0029:4A | Right Curtain Deployment Control 1: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0050:11 | Driver Seatbelt Sensor: Circuit Short to Ground | GO to PINPOINT TEST J . |
| B0050:12 | Driver Seatbelt Sensor: Circuit Short to Battery | GO to PINPOINT TEST J . |
| B0050:13 | Driver Seatbelt Sensor: Circuit Open | GO to PINPOINT TEST J . |
| B0050:1D | Driver Seatbelt Sensor: Circuit Current Out of Range | GO to PINPOINT TEST J . |
| B0050:2B | Driver Seatbelt Sensor: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0050:4A | Driver Seatbelt Sensor: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0052:11 | Passenger Seatbelt Sensor: Circuit Short to Ground | GO to PINPOINT TEST K . |
| B0052:12 | Passenger Seatbelt Sensor: Circuit Short to Battery | GO to PINPOINT TEST K . |
| B0052:13 | Passenger Seatbelt Sensor: Circuit Open | GO to PINPOINT TEST K . |
| B0052:1D | Passenger Seatbelt Sensor: Circuit Current Out of Range | GO to PINPOINT TEST K . |
| B0052:2B | Passenger Seatbelt Sensor: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B0052:4A | Passenger Seatbelt Sensor: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0080:11 | Driver Seatbelt Load Limiter Deployment Control: Circuit Short to Ground |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0080:12 | Driver Seatbelt Load Limiter Deployment Control: Circuit Short to Battery |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0080:13 | Driver Seatbelt Load Limiter Deployment Control: Circuit Open |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0080:1A | Driver Seatbelt Load Limiter Deployment Control: Circuit Resistance Below Threshold |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT Programmable Module Installation (PMI). Use As-Built data when CARRYING OUT Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0080:2B | Driver Seatbelt Load Limiter Deployment Control: Signal Cross Coupled |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0080:4A | Driver Seatbelt Load Limiter Deployment Control: Incorrect Component Installed |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0082:11 | Passenger Seatbelt Load Limiter Deployment Control: Circuit Short to Ground |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0082:12 | Passenger Seatbelt Load Limiter Deployment Control: Circuit Short to Battery |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0082:13 | Passenger Seatbelt Load Limiter Deployment Control: Circuit Open |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0082:1A | Passenger Seatbelt Load Limiter Deployment Control: Circuit Resistance Below Threshold |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0082:2B | Passenger Seatbelt Load Limiter Deployment Control: Signal Cross Coupled |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0082:4A | Passenger Seatbelt Load Limiter Deployment Control: Incorrect Component Installed |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B0090:11 | Left Frontal Restraints Sensor: Circuit Short to Ground | GO to PINPOINT TEST L . |
| B0090:4A | Left Frontal Restraints Sensor: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0090:81 | Left Frontal Restraints Sensor: Invalid Serial Data Received | INSTALL a new LH front impact severity sensor. REFER to FRONT IMPACT SEVERITY SENSOR . |
| B0090:93 | Left Frontal Restraints Sensor: No Operation | GO to PINPOINT TEST L . |
| B0090:96 | Left Frontal Restraints Sensor: Component Internal Failure | INSTALL a new LH front impact severity sensor. REFER to FRONT IMPACT SEVERITY SENSOR . |
| B0091:11 | Left Side Restraints Sensor 1: Circuit Short to Ground | GO to PINPOINT TEST M . |
| B0091:4A | Left Side Restraints Sensor 1: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0091:81 | Left Side Restraints Sensor 1: Invalid Serial Data Received | INSTALL a new driver front door side impact sensor. REFER to SIDE IMPACT SENSOR - FRONT DOOR . |
| B0091:93 | Left Side Restraints Sensor 1: No Operation | GO to PINPOINT TEST M . |
| B0091:96 | Left Side Restraints Sensor 1: Component Internal Failure | INSTALL a new driver front door side impact sensor. REFER to SIDE IMPACT SENSOR - FRONT DOOR . |
| B0092:11 | Left Side Restraints Sensor 2: Circuit Short to Ground | GO to PINPOINT TEST N . |
| B0092:4A | Left Side Restraints Sensor 2: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0092:81 | Left Side Restraints Sensor 2: Invalid Serial Data Received | INSTALL a new driver second row side impact sensor. REFER to SIDE IMPACT SENSOR - SECOND ROW . |
| B0092:93 | Left Side Restraints Sensor 2: No Operation | GO to PINPOINT TEST N . |
| B0092:96 | Left Side Restraints Sensor 2: Component Internal Failure | INSTALL a new driver second row side impact sensor. REFER to SIDE IMPACT SENSOR - SECOND ROW . |
| B0095:11 | Right Frontal Restraints Sensor: Circuit Short to Ground | GO to PINPOINT TEST O . |
| B0095:4A | Right Frontal Restraints Sensor: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0095:81 | Right Frontal Restraints Sensor: Invalid Serial Data Received | INSTALL a new RH front impact severity sensor. REFER to FRONT IMPACT SEVERITY SENSOR . |
| B0095:93 | Right Frontal Restraints Sensor: No Operation | GO to PINPOINT TEST O . |
| B0095:96 | Right Frontal Restraints Sensor: Component Internal Failure | INSTALL a new RH front impact severity sensor. REFER to FRONT IMPACT SEVERITY SENSOR . |
| B0096:11 | Right Side Restraints Sensor 1: Circuit Short to Ground | GO to PINPOINT TEST N . |
| B0096:4A | Right Side Restraints Sensor 1: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0096:81 | Right Side Restraints Sensor 1: Invalid Serial Data Received | INSTALL a new passenger front door side impact sensor. REFER to SIDE IMPACT SENSOR - FRONT DOOR . |
| B0096:93 | Right Side Restraints Sensor 1: No Operation | GO to PINPOINT TEST N . |
| B0096:96 | Right Side Restraints Sensor 1: Component Internal Failure | INSTALL a new passenger front door side impact sensor. REFER to SIDE IMPACT SENSOR - FRONT DOOR . |
| B0097:11 | Right Side Restraints Sensor 2: Circuit Short to Ground | GO to PINPOINT TEST M . |
| B0097:4A | Right Side Restraints Sensor 2: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B0097:81 | Right Side Restraints Sensor 2: Invalid Serial Data Received | INSTALL a new passenger second row side impact sensor. REFER to SIDE IMPACT SENSOR - SECOND ROW . |
| B0097:93 | Right Side Restraints Sensor 2: No Operation | GO to PINPOINT TEST M . |
| B0097:96 | Right Side Restraints Sensor 2: Component Internal Failure | INSTALL a new passenger second row side impact sensor. REFER to SIDE IMPACT SENSOR - SECOND ROW . |
| B00A0:09 | Occupant Classification System: Component Failure | GO to PINPOINT TEST R . |
| B00A0:4A | Occupant Classification System: Incorrect Component Installed | GO to PINPOINT TEST R . |
| B00A0:63 | Occupant Classification System: Circuit/Component Protection Time-Out | GO to PINPOINT TEST R . |
| B00A0:64 | Occupant Classification System: Signal Plausibility Failure | GO to PINPOINT TEST R . |
| B00A0:68 | Occupant Classification System: Event Information | GO to PINPOINT TEST R . |
| B00B5:11 | Driver Seat Track Position Restraints Sensor: Circuit Short to Ground | GO to PINPOINT TEST S . |
| B00B5:12 | Driver Seat Track Position Restraints Sensor: Circuit Short to Battery | GO to PINPOINT TEST S . |
| B00B5:13 | Driver Seat Track Position Restraints Sensor: Circuit Open | GO to PINPOINT TEST S . |
| B00B5:1D | Driver Seat Track Position Restraints Sensor: Circuit Current Out of Range | GO to PINPOINT TEST S . |
| B00B5:2B | Driver Seat Track Position Restraints Sensor: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B00B5:4A | Driver Seat Track Position Restraints Sensor: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B00D5:01 | Restraint System Passenger Disable Indicator: General Electrical Failure | CONFIGURE the RCM
using As-Built data. CLEAR all RCM
DTCs and REPEAT the self-test. If DTC B00D5:01 returns, the RCM has received a fault message from the FCIM indicating a fault in the PAD indicator. CARRY OUT a self-test of the FCIM and REPAIR any DTCs. Do not replace the RCM for this DTC. |
| B00D5:11 | Restraint System Passenger Disable Indicator: Circuit Short to Ground | GO to PINPOINT TEST T . |
| B00D5:12 | Restraint System Passenger Disable Indicator: Circuit Short to Battery | GO to PINPOINT TEST T . |
| B00D5:13 | Restraint System Passenger Disable Indicator: Circuit Open | GO to PINPOINT TEST T . |
| B00D5:4A | Restraint System Passenger Disable Indicator: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B00DF:13 | Passenger Restraints Disable Switch: Incorrect Component Installed |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B1193:00 | Crash Event Storage Full and Locked: No Sub Type Information | This DTC indicates the vehicle has been involved in a collision. INSTALL a new RCM and impact sensors. REFER to INSPECTION AND REPAIR AFTER A SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPLOYMENT . |
| B11CD:11 | Driver Frontal Airbag Canister Vent: Circuit Short to Ground |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B11CD:12 | Driver Frontal Airbag Canister Vent: Circuit Short to Battery |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B11CD:13 | Driver Frontal Airbag Canister Vent: Circuit Open |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B11CD:1A | Driver Frontal Airbag Canister Vent: Circuit Resistance Below Threshold |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B11CD:2B | Driver Frontal Airbag Canister Vent: Signal Cross Coupled |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B11CD:4A | Driver Frontal Airbag Canister Vent: Incorrect Component Installed |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B11D8:12 | Restraint Event Notification: Circuit Short to Battery | GO to PINPOINT TEST AI . |
| B11D8:14 | Restraint Event Notification: Circuit Short to Ground or Open | GO to PINPOINT TEST AI . |
| B1202:01 | Restraint System Passenger Enable Indicator: General Electrical Failure | The RCM has received a fault message from the FCIM indicating a fault in the PAD indicator. CARRY OUT a self-test of the FCIM and REPAIR any DTCs. Do not replace the RCM for this DTC. |
| B1211:11 | Driver Seatbelt Retractor Pretensioner Deployment Control: Circuit Short to Ground | GO to PINPOINT TEST U . |
| B1211:12 | Driver Seatbelt Retractor Pretensioner Deployment Control: Circuit Short to Battery | GO to PINPOINT TEST U . |
| B1211:13 | Driver Seatbelt Retractor Pretensioner Deployment Control: Circuit Open | GO to PINPOINT TEST U . |
| B1211:1A | Driver Seatbelt Retractor Pretensioner Deployment Control: Circuit Resistance Below Threshold | GO to PINPOINT TEST U . |
| B1211:2B | Driver Seatbelt Retractor Pretensioner Deployment Control: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B1211:4A | Driver Seatbelt Retractor Pretensioner Deployment Control: Incorrect Component Installed | GO to PINPOINT TEST X . |
| B1212:11 | Driver Seatbelt Buckle Pretensioner Deployment Control: Circuit Short to Ground |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B1212:12 | Driver Seatbelt Buckle Pretensioner Deployment Control: Circuit Short to Battery |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B1212:13 | Driver Seatbelt Buckle Pretensioner Deployment Control: Circuit Open |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B1212:1A | Driver Seatbelt Buckle Pretensioner Deployment Control: Circuit Resistance Below Threshold |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B1212:2B | Driver Seatbelt Buckle Pretensioner Deployment |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the Control: Signal Cross Coupled incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B1212:4A | Driver Seatbelt Buckle Pretensioner Deployment Control: Incorrect Component Installed |
NOTE:
This vehicle is not equipped with this component. This DTC indicates the RCM
is incorrectly configured or the incorrect RCM
is installed to the vehicle. INSTALL a new RCM
and CARRY OUT PMI
. Use As-Built data when carrying out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM)
. |
| B1214:11 | Passenger Seatbelt Retractor Pretensioner Deployment Control: Circuit Short to Ground | GO to PINPOINT TEST V . |
| B1214:12 | Passenger Seatbelt Retractor Pretensioner Deployment Control: Circuit Short to Battery | GO to PINPOINT TEST V . |
| B1214:13 | Passenger Seatbelt Retractor Pretensioner Deployment Control: Circuit Open | GO to PINPOINT TEST V . |
| B1214:1A | Passenger Seatbelt Retractor Pretensioner Deployment Control: Circuit Resistance Below Threshold | GO to PINPOINT TEST V . |
| B1214:2B | Passenger Seatbelt Retractor Pretensioner Deployment Control: Signal Cross Coupled | GO to PINPOINT TEST W . |
| B1214:4A | Passenger Seatbelt Retractor Pretensioner Deployment Control: Incorrect Component Installed | GO to PINPOINT TEST X . |
| U0028:08 | Vehicle Communication Bus A: Bus Signal/Message Failure | GO to PINPOINT TEST Y . |
| U0028:88 | Vehicle Communication Bus A: Bus Off | GO to PINPOINT TEST Y . |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information |
NOTE:
The DTC sets in a module that is reporting a communication fault from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM
as part of repair. REFER to MODULE COMMUNICATIONS NETWORK
to diagnose no communication with the Body Control Module (BCM). |
| U0154:00 | Lost Communication With Restraints Occupant Classification System Module: No Sub Type Information |
NOTE:
The DTC sets in a module that is reporting a communication fault from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM
as part of repair. REFER to MODULE COMMUNICATIONS NETWORK
to diagnose no communication with the Occupant Classification System Module (OCSM). |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information |
NOTE:
The DTC sets in a module that is reporting a communication fault from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM
as part of repair. REFER to MODULE COMMUNICATIONS NETWORK
to diagnose the communication concern. |
| U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information |
NOTE:
This DTC sets in the RCM
if a message is not received from the Accessory Protocol Interface Module (APIM). CHECK for additional RCM
and APIM DTCs.REFER to the appropriate article to diagnose the DTCs. If no other DTCs are present, REFER to MODULE COMMUNICATIONS NETWORK
to diagnose the APIM communication concern. |
| U0300:00 | Internal Control Module Software Incompatibility: No Sub Type Information | CARRY OUT Programmable Module Installation (PMI). RETRIEVE RCM DTCs. If RCM DTC U0300:00 is retrieved on-demand during self-test, INSTALL a new RCM . REFER to RESTRAINTS CONTROL MODULE (RCM) . |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | CARRY OUT a self-test of the BCM . REFER to MULTIFUNCTION ELECTRONIC MODULES to diagnose any DTCs that are retrieved. |
| U0554:00 | Invalid Data Received From Accessory Protocol Interface Module: No Sub Type Information | CHECK for additional RCM and APIM DTCs. REFER to the appropriate article to diagnose the DTCs. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CARRY OUT PMI . RETRIEVE RCM DTCs. If RCM DTC U2100:00 is retrieved on-demand, INSTALL a new RCM . REFER to RESTRAINTS CONTROL MODULE (RCM) . |
| U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information | INSTALL a new RCM and CARRY OUT Programmable Module Installation (PMI). Use As-Built data when CARRYING out Programmable Module Installation (PMI) for this DTC. REFER to RESTRAINTS CONTROL MODULE (RCM) . |
| U3000:46 | Control Module: Calibration/Parameter Memory Failure | INSTALL a new RCM and CARRY OUT Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM) . |
| U3000:49 | Control Module: Internal Electronic Failure | INSTALL a new RCM and CARRY OUT Programmable Module Installation (PMI). If DTC U2200:00 is also present, use As-Built data when CARRYING out Programmable Module Installation (PMI). REFER to RESTRAINTS CONTROL MODULE (RCM) . |
| U3000:4A | Control Module: Incorrect Component Installed | GO to PINPOINT TEST X . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST Z . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST Z . |