LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> F-150 SVT Raptor, 4D Pickup >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Information System And Entertainment System (8 Inch Touchscreen) DTCS >> Accessory Protocol Interface Module (APIM)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accessory Protocol Interface Module (APIM)

DTC INDEX

DTC Description Action
C1001:01 Vision System Camera: General Electrical Failure REFER to The rear video is inoperative in PARKING AID .
B108E:01 Display: General Electrical Failure GO to PINPOINT TEST X .
B116A:01 Handset Microphone: General Electrical Failure GO to PINPOINT TEST P .
B1215:00 External Memory Card: No Sub Type Information GO to PINPOINT TEST Y .
B1252:11 USB Port: Circuit Short to Ground
B1252:13 USB Port: Circuit Open
B12B8:11 USB Port #2: Circuit Short To Ground
NOTE: This DTC  refers to USB  port #2 on the APIM  itself, which is not used.
  • INSPECT the APIM USB  port #2 for damage and REMOVE any debris.
  • CLEAR the DTCs.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  B12B8:11 is retrieved again, refer to  APIM HARDWARE TESTING  .
U0140:00 Lost Communication With Body Control Module: No Sub Type Information GO to PINPOINT TEST AB .
U0151:00 Lost Communication With Restraints Control Module: No Sub Type Information GO to PINPOINT TEST AC .
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information GO to PINPOINT TEST AD .
U0162:00 Lost Communication With Navigation Display Module: No Sub Type Information GO to PINPOINT TEST X .
U016A:00 Lost Communication With Global Positioning System Module: No Sub Type Information GO to PINPOINT TEST AE .
U0184:00 Lost Communication With Radio: No Sub Type Information GO to PINPOINT TEST AF .
U0256:00 Lost Communication With Front Controls Interface
Module "A": No Sub Type Information		 GO to PINPOINT TEST AH .
U0423:00 Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information RETRIEVE and FOLLOW DTCs present in the IPC  . REFER to INSTRUMENTATION, MESSAGE CENTER, AND WARNING CHIMES .
U1A00:87 Private Communication Network: Missing Message GO to PINPOINT TEST C .
U2017:45 Control Module Software #2: Program Memory Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U2017:45 is retrieved again, refer to  APIM HARDWARE TESTING  .
U2017:51 Control Module Software #2: Not Programmed This DTC  sets due to incomplete or incorrect APIM  programming/provisioning. CHECK vehicle service history for recent service actions related to the APIM  . If there have been recent service actions with the APIM  , REPEAT/PERFORM the APIM  programming as directed by the scan tool. REFER to APIM PROGRAMMING in the Description and Operation.
If there have been no recent service actions, the APIM  has failed to retain configuration data. PERFORM the APIM  Hardware Test. refer to  APIM HARDWARE TESTING  .
U2017:52 Control Module Software #2: Not Activated This DTC  sets due to incomplete or incorrect APIM  programming/provisioning. CHECK vehicle service history for recent service actions related to the APIM  . If there have been recent service actions with the APIM  , REPEAT/PERFORM the APIM  programming as directed by the scan tool. REFER to APIM PROGRAMMING in the Description and Operation.
If there have been no recent service actions, the APIM  has failed to retain configuration data. PERFORM the APIM  Hardware Test. refer to  APIM HARDWARE TESTING  .
U2017:54 Control Module Software #2: Missing Calibration This DTC  sets due to incomplete or incorrect APIM  programming/provisioning. CHECK vehicle service history for recent service actions related to the APIM  . If there have been recent service actions with the APIM  , REPEAT/PERFORM the APIM  programming as directed by the scan tool. REFER to APIM PROGRAMMING in the Description and Operation.
If there have been no recent service actions, the APIM  has failed to retain configuration data. PERFORM the APIM  Hardware Test. refer to  APIM HARDWARE TESTING  .
U2100:00 Initial Configuration Not Complete: No Sub Type Information This DTC  sets due to incomplete or incorrect APIM  programming/provisioning. CHECK vehicle service history for recent service actions related to the APIM  . If there have been recent service actions with the APIM  , REPEAT/PERFORM the APIM  programming as directed by the scan tool. REFER to APIM PROGRAMMING in the Description and Operation.
If there have been no recent service actions, the APIM  has failed to retain configuration data. PERFORM the APIM  Hardware Test. refer to  APIM HARDWARE TESTING  .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information This DTC  sets due to incomplete or incorrect APIM  programming/provisioning. CHECK vehicle service history for recent service actions related to the APIM  . If there have been recent service actions with the APIM  , REPEAT/PERFORM the APIM  programming as directed by the scan tool. REFER to APIM PROGRAMMING in the Description and Operation.
If there have been no recent service actions, the APIM  has failed to retain configuration data. PERFORM the APIM  Hardware Test. refer to  APIM HARDWARE TESTING  .
U3000:04 Control Module: System Internal Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:04 is retrieved again, refer to  APIM HARDWARE TESTING  .
U3000:41 Control Module: General Checksum Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:41 is retrieved again, refer to  APIM HARDWARE TESTING  .
U3000:42 Control Module: General Memory Failure
  • CLEAR the DTC.
  • WAIT at least 10 seconds.
  • REPEAT the self-test.
  • If DTC  U3000:42 is retrieved again, refer to  APIM HARDWARE TESTING  .
U3000:88 Control Module: Bus Off
NOTE: Network communication/message DTCs can result from intermittent concerns such as damaged wiring or low battery voltage occurrences. Additionally, vehicle repair procedures such as module reprogramming often set these DTCs. Replacing a module to resolve a network DTC is unlikely to resolve the concern. The module was unable to communicate on the network at a point in time. The fault is not currently present.
To avoid repeat network concerns:
  • INSPECT for damaged or corroded wiring at the APIM  .
  • TEST the vehicle battery. REFER to Charging Systems in CHARGING SYSTEM .
  • CLEAR the DTC.
  • REPEAT the network test with the diagnostic scan tool.
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to PINPOINT TEST AJ .
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to PINPOINT TEST AK .
scientia non olet · About LEMON Manuals