Component testing procedure
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Starter relay circuit | 4 and 7 | Off | Open circuit |
| Acc/Run | Open circuit | ||
| Start/Run | Open circuit | ||
| Start | Closed circuit | ||
| Run/Start power circuit | 4 and 1 | Off | Open circuit |
| Ace/Run | Open circuit | ||
| Start/Run | Closed circuit | ||
| Start | Closed circuit | ||
| Run/Acc power circuit | 4 and 6 | Off | Open circuit |
| Acc/Run | Closed circuit | ||
| StartRun | Closed circuit | ||
| Start | Open circuit | ||
| Key removal inhibit circuit | 4 and 3 | 65-75 Ω |