Audio Front Control Module (ACM) (Without Navigation)
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B11BA:1C | Steering Wheel Audio Switch Pack: Circuit Voltage out of Range | GO to PINPOINT TEST R . |
| B11BA:63 | Steering Wheel Audio Switch Pack: Circuit/Component Protection Time-Out | GO to PINPOINT TEST R . |
| B1A01:01 | Speaker #1: General Electrical Failure | GO to PINPOINT TEST G . |
| B1A01:11 | Speaker #1: Circuit Short to Ground | GO to PINPOINT TEST G . |
| B1A01:12 | Speaker #1: Circuit Short to Battery | GO to PINPOINT TEST G . |
| B1A01:13 | Speaker #1: Circuit Open | GO to PINPOINT TEST G . |
| B1A02:01 | Speaker #2: General Electrical Failure | GO to PINPOINT TEST G . |
| B1A02:11 | Speaker #2: Circuit Short to Ground | GO to PINPOINT TEST G . |
| B1A02:12 | Speaker #2: Circuit Short to Battery | GO to PINPOINT TEST G . |
| B1A02:13 | Speaker #2: Circuit Open | GO to PINPOINT TEST G . |
| B1A03:01 | Speaker #3: General Electrical Failure | GO to PINPOINT TEST G . |
| B1A03:11 | Speaker #3: Circuit Short to Ground | GO to PINPOINT TEST G . |
| B1A03:12 | Speaker #3: Circuit Short to Battery | GO to PINPOINT TEST G . |
| B1A03:13 | Speaker #3: Circuit Open | GO to PINPOINT TEST G . |
| B1A04:01 | Speaker #4: General Electrical Failure | GO to PINPOINT TEST G . |
| B1A04:11 | Speaker #4: Circuit Short to Ground | GO to PINPOINT TEST G . |
| B1A04:12 | Speaker #4: Circuit Short to Battery | GO to PINPOINT TEST G . |
| B1A04:13 | Speaker #4: Circuit Open | GO to PINPOINT TEST G . |
| B1A05:02 | Speaker #5: General Signal Failure | GO to PINPOINT TEST H . |
| B1A56:21 | Antenna: Signal Amplitude < Minimum | GO to PINPOINT TEST A . |
| B1A89:01 | Satellite Antenna: General Electrical Failure | GO to PINPOINT TEST B . |
| B1A89:13 | Satellite Antenna: Circuit Open | GO to PINPOINT TEST B . |
| B1D19:49 | Compact Disc Unit: Internal Electronic Failure | CLEAR the DTCs. REPEAT the self-test. If DTC B1D19:49 is retrieved again, INSTALL a new Audio Front Control Module (ACM). REFER to AUDIO CONTROL MODULE (ACM) . REPEAT the self-test. |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AF . |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST AI . |
| U0159:00 | Lost Communication with Parking Assist Control Module "A": No Sub Type Information | GO to PINPOINT TEST AJ . |
| U0197:00 | Lost Communication With Telephone Control Module: No Sub Type Information | GO to PINPOINT TEST AQ . |
| U0255:00 | Lost Communication With Front Display Interface Module: No Sub Type Information | GO to PINPOINT TEST AR . |
| U0256:00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to PINPOINT TEST AS . |
| U2014:41 | Control Module Hardware: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:41 is retrieved again, INSTALL a new ACM. REFER to AUDIO CONTROL MODULE (ACM) . REPEAT the self-test. |
| U2014:42 | Control Module Hardware: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:42 is retrieved again, INSTALL a new ACM. REFER to AUDIO CONTROL MODULE (ACM) . REPEAT the self-test. |
| U2014:96 | Control Module Hardware: Component Internal Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U2014:96 is retrieved again, INSTALL a new ACM. REFER to AUDIO CONTROL MODULE (ACM) . REPEAT the self-test. |
| U201A:51 | Control Module Main Calibration Data: Not Programmed | REFER to MODULE CONFIGURATION . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI procedure as directed by the diagnostic scan tool. If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. REFER to AUDIO CONTROL MODULE (ACM) . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI procedure as directed by the diagnostic scan tool. If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. REFER to AUDIO CONTROL MODULE (ACM) . |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AT . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AU . |