Anti-Theft System (Passive Without IA) DTCS: BCM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B10D5:13 | PATS Antenna: Circuit Open | The BCM received an incomplete or corrupt response from the PATS transceiver. INSTALL a new PATS transceiver. REFER to PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER . |
| B10D7:05 | PATS Key: System Programming Failure | GO to PINPOINT TEST B . |
| B10D7:87 | PATS Key: Missing Message | GO to PINPOINT TEST C . |
| B10D7:8F | PATS Key: Erratic | GO to PINPOINT TEST C . |
| B10D9:87 | PATS Transponder: Missing Message | GO to PINPOINT TEST D . |
| B10DA:51 | PATS Target Identifier: Not Programmed | There is no PCM ID stored in the BCM. CARRY OUT a parameter reset. REFER to PASSIVE ANTI-THEFT SYSTEM (PATS) PARAMETER RESET . CLEAR the DTCs. REPEAT the self-test. |
| B130D:00 | Memory Full for Integrated Key Programming: No Sub Type Information | The maximum amount of IKTs (4) have been programmed into the BCM. OBTAIN all the customer's IKTs. ERASE all the and PROGRAM a maximum of 4. REFER to ERASE ALL KEYS AND PROGRAM TWO KEYS . |
| C113A:11 | Wakeup Control: Circuit Short To Ground | GO to PINPOINT TEST E . |
| C113A:15 | Wakeup Control: Circuit Short To Battery or Open | GO to PINPOINT TEST E . |
| All other DTCs | - | REFER to the BCM DTC Chart in MULTIFUNCTION ELECTRONIC MODULES . |