Body Control Module (BCM) and Instrument Panel Cluster (IPC) Car Configuration
NOTE:
The BCM
and IPC
have a unique procedure to set Car Configuration Parameters. Configuration changes made will affect several modules. If the car configuration is changed in the BCM
or IPC
, an adaptive learning of the car configuration may be required in some modules (such as ABS
module or RCM
), depending on the changed parameter.
NOTE:
On the scan tool, first select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Retrieve the Vehicle Configuration Data. Next select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Modify and Reinstate Vehicle Configuration Data. Change parameters as needed.
| Module Name | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Car Configuration Parameters |
|---|---|---|---|---|
| BCM | Yes (through Car Configuration Parameters. Refer to BCM in MULTIFUNCTION ELECTRONIC MODULES .) | Yes | No |
NOTE:
Do not change car configuration parameters except those listed below.
|
| IPC | Yes | Yes | No |