LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Control System) >> Engine Coolant Temperature Sensor (ECTS) >> Repair procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Inspection

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the ECTS connector.
  3. Remove the ECTS.
  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 1 and 3.
  5. Check that the resistance is within the specification.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals