APIM - Premium Plus
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| C1001:01 | Vision System Camera: General Electrical Failure | Refer to article 'Parking Aid', Go to Pinpoint Test I . |
| B108E:01 | Display: General Electrical Failure | GO to Pinpoint Test X . |
| B116A:01 | Handset Microphone: General Electrical Failure | GO to Pinpoint Test S . |
| B1215:00 | External Memory Card: No Sub Type Information | For vehicles with navigation, GO to Pinpoint Test Y . For vehicles without navigation, GO to Pinpoint Test T . |
| B1252:11 | USB Port: Circuit Short To Ground | GO to Pinpoint Test T . |
| B12B8:11 | USB Port #2: Circuit Short To Ground |
NOTE:
This DTC refers to USB port #2 on the APIM itself, which is not used. INSPECT the APIM USB port #2 for damage and remove any debris. CLEAR the DTCs. REPEAT the self-test. If DTC B12B8:11 is retrieved again, Refer to APIM HARDWARE TESTING
. |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test AA . |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to Pinpoint Test AB . |
| U0155:00 | Lost Communication With IPC Module: No Sub Type Information | GO to Pinpoint Test AC . |
| U0162:00 | Lost Communication With Navigation Display Module: No Sub Type Information | GO to Pinpoint Test X . |
| U016A:00 | Lost Communication With Global Positioning System Module: No Sub Type Information | GO to Pinpoint Test AD . |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test AE . |
| U0256:00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AG . |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information | REFER to Instrumentation, Message Center, and Warning Chimes to RETRIEVE and FOLLOW DTCs present in the IPC. |
| U1A00:87 | Private Communication Network: Missing Message | GO to Pinpoint Test C . |
| U2017:45 | Control Module Software #2: Program Memory Failure | CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC U2017:45 is still present, Refer to APIM HARDWARE TESTING . |
| U2017:51 | Control Module Software #2: Not Programmed | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming as directed by the diagnostic scan tool. REFER to APIM Programming in Information and Entertainment System - Premium Plus . If there have been no recent service actions, Refer to APIM HARDWARE TESTING . |
| U2017:52 | Control Module Software #2: Not Activated | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming as directed by the diagnostic scan tool. REFER to APIM Programming in Information and Entertainment System - Premium Plus . If there have been no recent service actions, Refer to APIM HARDWARE TESTING . |
| U2017:54 | Control Module Software #2: Missing Calibration | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming as directed by the diagnostic scan tool. REFER to APIM Programming in Information and Entertainment System - Premium Plus . If there have been no recent service actions, Refer to APIM HARDWARE TESTING . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming as directed by the diagnostic scan tool. REFER to APIM Programming in Information and Entertainment System - Premium Plus . If there have been no recent service actions, Refer to APIM HARDWARE TESTING . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | This DTC sets due to incomplete or incorrect PMI procedures. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming as directed by the diagnostic scan tool. REFER to APIM Programming in Information and Entertainment System - Premium Plus . If there have been no recent service actions, Refer to APIM HARDWARE TESTING . |
| U3000:04 | Control Module: System Internal Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:04 is still present, Refer to APIM HARDWARE TESTING . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:41 is still present, Refer to APIM HARDWARE TESTING . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the DTCs. REPEAT the self-test. If DTC U3000:42 is still present, Refer to APIM HARDWARE TESTING . |
| U3000:88 | Control Module: Bus Off |
NOTE:
Network communication/message DTCs may result from intermittent concerns such as damaged wiring or low battery voltage occurrences. Additionally, vehicle repair procedures such as module reprogramming often set these DTCs. To avoid repeat network concerns, INSPECT for damaged or corroded wiring at the APIM. Test the vehicle battery, REFER to Charging System
. Replacing a module to resolve a network DTC is unlikely to resolve the concern. The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC. REPEAT the network test with the scan tool. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AH . |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AI . |