Pinpoint Test FD: Brake Pedal Inputs: Introduction: Notes
This pinpoint test is intended to diagnose the following:
- brake pedal position (BPP) switch (13480)
- harness circuits: B+, BPP, BPS and BPS1
- PCM (12A650)
| Vehicle | Connector | Pin | Circuit |
|---|---|---|---|
| E-Series | A | 3 | BPS |
| Escape/Kuga, Expedition, Explorer, Focus, Mustang, Navigator, Transit Connect |
A | 2 3 |
GND BPS |
| Motorhome/Stripped Chassis/Step Van | A | 3 2 |
GND BPS1 |
| All other vehicles | A | 3 2 |
GND BPS |