Park Detect Switch

The park detect switch (PDS) is a normally open momentary contact switch that closes when the shift lever is place in the P position. The PDS signal is used by the IC to illuminate the P in the PRNDS display. On vehicles without intelligent access, the PDS also grounds the key removal inhibit solenoid in the ignition lock cylinder.

Component Description

Brake Shift Interlock Actuator 

The BSIA system consists of:

• a BSIA that is integral to the selector lever assembly.
• an ignition switch.
• a BPP switch.
• a BCM.

Selector Lever Cable 

The selector lever cable consists of:

• a cable that connect the transmission manual control lever to the selector lever assembly.
• a cable grommet that is fastened to the floor pan.
• an adjuster locking tab at the transmission manual control lever.

Selector Lever 

• a selector lever knob.
• a BSIA that is integral to the selector lever assembly.
• a park detect switch that is integral to the selector lever assembly.