Normal Operation and Fault Conditions
With the ignition ON, the BCM sends messages to the SASM over the HS-CAN. If the SASM does not receive these messages within the specified time frame, the module sets a DTC. This can be due to a BCM failure, a circuit failure on the HS-CAN or an excessive load on the network. For information on the cruise control messages sent to the SASM by the BCM, refer the Description and Operation in ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL .
PPT T SASM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | Sets when the SASM does not receive any messages from the BCM. |