LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2016 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Anti-Lock Brake System Component Testing) >> DTC Symptom Index >> DTC Index >> SASM - Steering Angle Sensor Module >> DTC B1016: Status Switch >> Action
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC B1016: Status Switch: Action

WARNING: This page is about a different car, the 2016 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

This DTC sets if the SASM logic power circuit current is greater than 1.5A and less than 2.0A for at least 1 second or the current is greater than 2.0A for less than 1 second. CARRY OUT the SASM Module Reset routine. CYCLE the ignition from ON to OFF and back to ON. Using a diagnostic scan tool, CLEAR the DTC. CARRY OUT the SASM self-test. If the DTC returns, INSTALL a new SASM-clockspring assembly. REFER to the appropriate REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals