LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2016 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Anti-Lock Brake System Component Testing) >> DTC Symptom Index >> DTC Index >> SASM - Steering Angle Sensor Module >> DTC U0401: Invalid Data Received from ECM/PCM A
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0401: Invalid Data Received from ECM/PCM A

WARNING: This page is about a different car, the 2016 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
Failure Action
00 This DTC sets if the SASM receives invalid data in the gear lever position message or the power pack status message. RETRIEVE and DIAGNOSE all PCM and GWM DTCs. REFER to the Diagnosis and Testing in MODULE COMMUNICATIONS NETWORK or the appropriate ELECTRONIC ENGINE CONTROLS SYSTEM - 2.0L ECOBOOST (184KW/250PS) - MI4 , ELECTRONIC ENGINE CONTROLS SYSTEM - 2.7L ECOBOOST (238KW/324PS) or ELECTRONIC ENGINE CONTROLS SYSTEM - 3.5L DURATEC (212KW/278PS) . If there are no DTCs in the PCM or GWM, the DTC may be caused by an intermittent concern. SET the ignition to OFF. DISCONNECT and INSPECT all PCM and GWM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
81 This DTC sets if the SASM receives invalid data in the vehicle speed quality factor check message. RETRIEVE and DIAGNOSE all PCM and GWM DTCs. REFER to the Diagnosis and Testing in MODULE COMMUNICATIONS NETWORK or the appropriate ELECTRONIC ENGINE CONTROLS SYSTEM - 2.0L ECOBOOST (184KW/250PS) - MI4 , ELECTRONIC ENGINE CONTROLS SYSTEM - 2.7L ECOBOOST (238KW/324PS) or ELECTRONIC ENGINE CONTROLS SYSTEM - 3.5L DURATEC (212KW/278PS) . If there are no DTCs in the PCM or GWM, the DTC may be caused by an intermittent concern. SET the ignition to OFF. DISCONNECT and INSPECT all PCM and GWM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
82 This DTC sets if the SASM receives invalid data in the vehicle speed counter check message. RETRIEVE and DIAGNOSE all PCM and GWM DTCs. REFER to the Diagnosis and Testing in MODULE COMMUNICATIONS NETWORK or the appropriate ELECTRONIC ENGINE CONTROLS SYSTEM - 2.0L ECOBOOST (184KW/250PS) - MI4 , ELECTRONIC ENGINE CONTROLS SYSTEM - 2.7L ECOBOOST (238KW/324PS) or ELECTRONIC ENGINE CONTROLS SYSTEM - 3.5L DURATEC (212KW/278PS) . If there are no DTCs in the PCM or GWM, the DTC may be caused by an intermittent concern. SET the ignition to OFF. DISCONNECT and INSPECT all PCM and GWM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
83 This DTC sets if the SASM receives invalid data in the vehicle speed checksum check message. RETRIEVE and DIAGNOSE all PCM and GWM DTCs. REFER to the Diagnosis and Testing in MODULE COMMUNICATIONS NETWORK or the appropriate ELECTRONIC ENGINE CONTROLS SYSTEM - 2.0L ECOBOOST (184KW/250PS) - MI4 , ELECTRONIC ENGINE CONTROLS SYSTEM - 2.7L ECOBOOST (238KW/324PS) or ELECTRONIC ENGINE CONTROLS SYSTEM - 3.5L DURATEC (212KW/278PS) . If there are no DTCs in the PCM or GWM, the DTC may be caused by an intermittent concern. SET the ignition to OFF. DISCONNECT and INSPECT all PCM and GWM electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
scientia non olet · About LEMON Manuals