DTC U2002: Switch: Action
WARNING: This page is about a different car, the 2016 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
This DTC sets if the high power circuit FET temperature exceeds 115°C (239°F) for 10 seconds or 125°C (257°F) for less than 1 second. DIAGNOSE all other SASM DTCs before diagnosing DTC U2002:98. CARRY OUT the SASM Module Reset routine. CYCLE the ignition from ON to OFF and back to ON. CLEAR the DTC and then CARRY OUT the SASM self-test. If the DTC returns, INSTALL a new SASM-clockspring assembly. REFER to the appropriate REMOVAL AND INSTALLATION .