PPT Ag Abs Module DTC Fault Trigger Conditions

WARNING: This page is about a different car, the 2016 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

DTC	Description	Fault Trigger Conditions
C0061:28	Lateral Acceleration Sensor: Signal Bias Level Out of Range/Zero Adjustment Failure	Sets when the ABS module detects the sensor signal is greater than the programmed maximum plausible sensor signal.
C0061:2F	Lateral Acceleration Sensor: Signal Erratic	Sets when the ABS module detects the lateral acceleration sensor signal is out of range when the vehicle is standing still.
C0061:64	Lateral Acceleration Sensor: Signal Plausibility Failure	Sets when the ABS module detects the sensor signal does not match the other stability sensor signals.
C0062:28	Longitudinal Acceleration Sensor: Signal Bias Level Out of Range/Zero Adjustment Failure	Sets when the ABS module detects the sensor signal is greater than the programmed maximum plausible sensor signal.
C0062:64	Longitudinal Acceleration Sensor: Signal Plausibility Failure	Sets when the ABS module detects the sensor signal does not match the other stability sensor signals.
C0063:28	Yaw Rate Sensor: Signal Bias Level Out of Range/Zero Adjustment Failure	Sets when the ABS module detects the sensor signal is greater than the programmed maximum plausible sensor signal.
C0063:2F	Yaw Rate Sensor: Signal Erratic	Sets when the ABS module detects the yaw rate sensor signal is out of range when the vehicle is standing still.
C0063:64	Yaw Rate Sensor: Signal Plausibility Failure	Sets when the ABS module detects the sensor signal does not match the other stability sensor signals.
C0064:28	Roll Rate Sensor: Signal Bias Level Out of Range/Zero Adjustment Failure	Sets when the ABS module detects the sensor signal is greater than the programmed maximum plausible sensor signal.
C0064:64	Roll Rate Sensor: Signal Plausibility Failure	Sets when the ABS module detects the sensor signal does not match the other stability sensor signals.