Section 97 (Module Communications Network (Electric Vehicle))
WARNING: This page is about a different variant/trim than selected.
- Description And Operation
- Communications Network - Overview
- Communications Network - System Operation and Component Description
- System Operation
- System Diagram
- Network Termination
- Gateway Modules
- High Speed Controller Area Network (HS-CAN)
- Electric Vehicle (EV) High Speed Controller Area Network (HS-CAN)
- Medium Speed Controller Area Network (MS-CAN)
- Infotainment Controller Area Network (I-CAN)
- Controller Area Network (CAN) Fault Tolerance
- Controller Area Network (CAN) Multiplex Messages
- System Operation
- Diagnosis And Testing
- Communications Network
- DTC Chart(s)
- Symptom Chart: Communication Network
- Pinpoint Tests
- Pinpoint Test A : The Powertrain Control Module (Pcm) Does Not Respond To The Scan Tool
- Pinpoint Test B : The Anti-Lock Brake System (Abs) Module Does Not Respond To The Scan Tool
- Pinpoint Test C : The Restraints Control Module (RCM) Does Not Respond To The Scan Tool
- Pinpoint Test D : The Occupant Classification System Module (OCSM) Does Not Respond To The Scan Tool
- Pinpoint Test E : The Steering Angle Sensor Module (SASM) Does Not Respond To The Scan Tool
- Pinpoint Test F : The Instrument Panel Cluster (IPC) Does Not Respond To The Scan Tool
- Pinpoint Test G : The Body Control Module (BCM) Does Not Respond To The Scan Tool
- Pinpoint Test H : The Heating, Ventilation And Air Conditioning Module (HVAC) Module Does Not Respond To The Scan Tool
- Pinpoint Test I : The Audio Control Module (ACM) Does Not Respond To The Scan Tool
- Pinpoint Test J : The Driver Door Module (DDM) Does Not Respond To The Scan Tool
- Pinpoint Test K : The Passenger Door Module (PDM) Does Not Respond To The Scan Tool
- Pinpoint Test L : The Parking Aid Module (PAM) Does Not Respond To The Scan Tool
- Pinpoint Test M : The Accessory Protocol Interface Module (APIM) Does Not Respond To The Scan Tool
- Pinpoint Test N : The Front Controls Interface Module (FCIM) Does Not Respond To The Scan Tool
- Pinpoint Test O : The Remote Function Actuator (RFA) Module Does Not Respond To The Scan Tool
- Pinpoint Test P : The Transmission Control Module (TCM) Does Not Respond To The Scan Tool
- Pinpoint Test Q : The Power Steering Control Module (PSCM) Does Not Respond To The Scan Tool
- Pinpoint Test R : The TELEMATIC Control Unit (TCU) Does Not Respond To The Scan Tool
- Pinpoint Test S : The Battery Energy Control Module (BECM) Does Not Respond To The Scan Tool
- Pinpoint Test T : The Secondary On-Board Diagnostic Control Module (SOBDM) Does Not Respond To The Scan Tool
- Pinpoint Test U : The Air Conditioning Control Module (ACCM) Does Not Respond To The Scan Tool
- Pinpoint Test V : The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Scan Tool
- Pinpoint Test W : The Generic Function Module (GFM) Does Not Respond To The Scan Tool
- Pinpoint Test X : The Gateway Module (GWM) Does Not Respond To The Scan Tool
- Pinpoint Test Y : No High Speed Controller Area Network (HS-Can) Communication, All Modules Are Not Responding
- Pinpoint Test Z : No Electric Vehicle (EV) High Speed Controller Area Network (HS-Can) Communication, All Modules Are Not Responding
- Pinpoint Test Aa : No Medium Speed Controller Area Network (Ms-Can) Communication, All Modules Are Not Responding
- Pinpoint Test Ab : No Infotainment Controller Area Network (I-Can) Communication, All Modules Are Not Responding
- Pinpoint Test Ac : No Power To The Data Link Connector (DLC)
- Communications Network
- General Procedures
- Removal And Installation