Repair procedures: Installation
WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Install the component with the specified torques.
- Note that internal damage may occur when the component is dropped.
CAUTION:
- Apply the engine coolant to the O-ring.
CAUTION:
- Insert the sensor in the installation hole and be careful not to damage.
- Installation is reverse of removal.
Engine coolant temperature sensor installation:
29.4 ~ 39.2 N.m (3.0 ~ 4.0 kgf.m, 21.7 ~ 28.9 lb-ft)