Side And Rear Vision System
- Description And Operation
- Diagnosis And Testing
- Blind Spot Monitoring
- Side Obstacle Detection Control Module - Left (SOD-L) and Side Obstacle Detection Control Module - Right (SOD-R) DTC Chart
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A : BLIS ® Is Inoperative Or Does Not Operate Correctly
- Pinpoint Test B : The CTA System Is Inoperative Or Does Not Operate Correctly
- Pinpoint Test C : An Exterior Mirror Led Is Constantly On And An IPC Message Is Present
- Pinpoint Test D : DTC B11D6:11 Or DTC B11D6:15
- Pinpoint Test E : The Sod-R Does Not Respond To The Scan Tool Or Cannot Be Configured
- Pinpoint Test F : The IPC Message Center Displays A Blocked Sensor Message
- Pinpoint Test G : The BLIS ® And CTA System Cannot Be Turned Off In The IPC Message Center
- Pinpoint Test H : DTC U3000:44, 45, 46, 48, 49 Or 4A
- Pinpoint Test I : An Exterior Mirror BLIS ® /CTA Led Is Constantly On
- Pinpoint Test J : DTC U0140:00
- Blind Spot Monitoring
- Removal And Installation