Recalling a Stored Memory Position

NOTE: A memory recall can be initiated only if the vehicle is in PARK or NEUTRAL and the ignition is not in START. A memory recall in progress will not be affected by moving the ignition to START or by moving the gearshift lever out of PARK or NEUTRAL.

NOTE: Input from the driver seat control switch, memory SET switch, pedal adjust switch (if equipped), exterior mirror control switch (if equipped) and steering column control switch (if equipped) during a memory recall will abort the operation.

1.

The driver can recall the desired memory driver seat, memory exterior mirrors (if equipped), memory adjustable pedals (if equipped) and memory steering column (if equipped) positions by pressing either memory SET switch button 1 or 2. Pressing memory SET switch button 1 will initiate a recall of the positions stored for memory 1. Pressing memory SET switch button 2 will initiate a recall of the positions stored for memory 2.