April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Lever Cable Adjustment - 6F50/6F55

1.

Remove the ACL and outlet pipe. Refer to Intake Air Distribution and Filtering .

2.

GFD83345

Courtesy of FORD MOTOR COMPANY

3.

GFD84633

Courtesy of FORD MOTOR COMPANY

4.
1. 1.
  
  Rotate the manual control lever clockwise until it stops.
1. 2.
  
  Rotate the manual control lever counterclockwise one detent.

GFD84637

Courtesy of FORD MOTOR COMPANY

5.
1. 1.
  
  Gently pry the latch up.
1. 2.
  
  Push the lock tab to slide it over.

GFD84638

Courtesy of FORD MOTOR COMPANY

6.

GFD84639

Courtesy of FORD MOTOR COMPANY

7.

NOTE: To prevent selector lever cable damage, do not apply force to the selector lever cable between the manual control lever and the selector lever cable bracket.

NOTE: Make sure that the selector lever cable end is correctly installed onto the manual control lever ball stud by pulling back on the selector lever cable end.

GFD84640

Courtesy of FORD MOTOR COMPANY

8.

NOTE: After locking the adjuster, pull back on the adjuster to make sure it is securely installed.

GFD84641

Courtesy of FORD MOTOR COMPANY

9.

Install the ACL and outlet pipe. Refer to Intake Air Distribution and Filtering .

10.

Verify that the vehicle starts in PARK and NEUTRAL only and that the reverse lamps illuminate in REVERSE.