LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> C-Max Energi SE >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Information System And Entertainment System DTCS >> Am/Fm/Cd/ Sync >> FCDIM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Am/Fm/Cd/ Sync: FCDIM

DTC INDEX

DTC Description Action
B11BA:1C Steering Wheel Audio Switch Pack: Circuit Voltage Out of Range GO to Pinpoint Test U
B11BA:63 Steering Wheel Audio Switch Pack: Circuit/Component Protection Time-Out GO to Pinpoint Test U
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information GO to Pinpoint Test AE
U0184:00 Lost Communication With Radio: No Sub Type Information GO to Pinpoint Test AF
U0253:00 Lost Communication With Accessory Protocol Interface Module: No Sub Type Information GO to Pinpoint Test AH
U2013:87 Switch Pack: Missing Message GO to Pinpoint Test W
U201A:51 Control Module Main Calibration Data: Not Programmed CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI procedure as directed by the diagnostic scan tool. REFER to: Module Configuration - System Operation and Component Description . See PMI. If there have been no recent service actions, INSTALL a new FCDIM to correct the failure to retain configuration data. REFER to: Front Control/Display Interface Module (FCDIM) .
U2100:00 Initial Configuration Not Complete: No Sub Type Information CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI procedure as directed by the diagnostic scan tool. REFER to: Module Configuration - System Operation and Component Description . See PMI. If there have been no recent service actions, INSTALL a new FCDIM to correct the failure to retain configuration data. REFER to: Front Control/Display Interface Module (FCDIM) .
U2101:00 Control Module Configuration Incompatible: No Sub Type Information CHECK vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. If there have been recent service actions with this module, REPEAT/PERFORM the PMI procedure as directed by the diagnostic scan tool. REFER to: Module Configuration - System Operation and Component Description . See PMI. If there have been no recent service actions, INSTALL a new FCDIM to correct the failure to retain configuration data. REFER to: Front Control/Display Interface Module (FCDIM) .
U3000:41 Control Module: General Checksum Failure CLEAR the Diagnostic Trouble Codes (DTCs).
WAIT at least 10 seconds.
REPEAT the self-test.
If DTC U3000:41 is retrieved again, INSTALL a new FCDIM. REFER to: Front Control/Display Interface Module (FCDIM) .
U3000:42 Control Module: General Memory Failure CLEAR the Diagnostic Trouble Codes (DTCs).
WAIT at least 10 seconds.
REPEAT the self-test.
If DTC U3000:42 is retrieved again, INSTALL a new FCDIM. REFER to: Front Control/Display Interface Module (FCDIM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to Pinpoint Test AJ
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to Pinpoint Test AK
scientia non olet · About LEMON Manuals