Charging System DTCS: BCM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B11DB:83 | Battery Monitoring Module "A": Value of Signal Protection Calculation Incorrect | GO to Pinpoint Test A |
| B11DB:96 | Battery Monitoring Module hardware fault | GO to Pinpoint Test A |
| B129A:86 | LIN Bus "D": Signal Invalid | GO to Pinpoint Test A |
| B129A:88 | LIN Bus "D". Bus off | GO to Pinpoint Test A |
| B130C:12 | Load Shed Control: Circuit Short To Battery | The BCM monitors an unused load shed relay control circuit. If this DTC sets, disregard and diagnose other Diagnostic Trouble Codes (DTCs) or symptoms as required. |
| B130C:14 | Load Shed Control: Circuit Short To Ground or Open | The BCM monitors an unused load shed relay control circuit. If this DTC sets, disregard and diagnose other Diagnostic Trouble Codes (DTCs) or symptoms as required. |
| U1007:00 | Lost communication with Battery Monitoring Sensor "A": No Sub Type Information | GO to Pinpoint Test A |
| All Other DTCs | - | REFER to: Body Control Module (BCM) . |