Instrumentation, Message Center, And Warning Chimes DTCS: IPC
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| C1D22:09 | Steering Wheel Switch Right Module: Component Failure | REFER to: Information and Entertainment System . |
| C1D22:11 | Steering Wheel Switch Right Module: Circuit Short To Ground | REFER to: Information and Entertainment System . |
| C1D22:12 | Steering Wheel Switch Right Module: Circuit Short To Battery | REFER to: Information and Entertainment System . |
| C2003:09 | Steering Wheel Switch Left Module: Component Failure | GO to Pinpoint Test T |
| C2003:11 | Steering Wheel Switch Left Module: Circuit Short To Ground | GO to Pinpoint Test T |
| C2003:12 | Steering Wheel Switch Left Module: Circuit Short To Battery | GO to Pinpoint Test T |
| P1534:01 | Restraint Deployment Indicator Circuit: General Electrical Failure | IPC HARDWARE TESTING DIAGNOSE all RCM Diagnostic Trouble Codes (DTCs). REFER to: Airbag Supplemental Restraint System (SRS) . |
| P1706:00 | High Vehicle Speed Observed in Park: No Sub Type Information | GO to Pinpoint Test N |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test AW |
| U0146:00 | Lost Communication With Gateway "A": No Sub Type Information | GO to Pinpoint Test AX |
| U0164:00 | Lost Communication With HVAC Control Module: No Sub Type Information | GO to Pinpoint Test AY |
| U0214:00 | Lost Communication With Remote Function Actuation: No Sub Type Information | GO to Pinpoint Test AZ |
| U0293:00 | Lost Communication With Hybrid/EV Powertrain Control Module: No Sub Type Information | GO to Pinpoint Test BA |
| U0401:81 | Invalid Data Received from ECM/PCM A: Invalid Serial Data Received | This DTC sets when the IPC receives invalid network data for temperature and vehicle speed from the PCM. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the PCM and other modules on the network. REFER to: ELECTRONIC ENGINE CONTROLS - PLUG-IN HYBRID ELECTRIC VEHICLE (PHEV) . |
| U0401:82 | Invalid Data Received from ECM/PCM A: Alive/Sequence Counter Incorrect/Not Updated | GO to Pinpoint Test BB |
| U0412:82 | Invalid Data Received From Battery Energy Control Module A: Alive/Sequence Counter Incorrect/Not Updated | GO to Pinpoint Test BC |
| U0412:86 | Invalid Data Received From Battery Energy Control Module A: Signal Invalid | This DTC sets when the IPC receives invalid network data for the high voltage battery gauge. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BECM and other modules on the network. REFER to: HIGH VOLTAGE BATTERY, MOUNTING AND CABLES - PLUG-IN HYBRID ELECTRIC VEHICLE (PHEV) . |
| U0415:81 | Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: Invalid Serial Data Received | This DTC sets when the IPC receives invalid ABS network data. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the ABS module and other modules on the network. REFER to: Anti-Lock Brake System (ABS) and Stability Control . |
| U0415:82 | Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: Alive/Sequence Counter Incorrect/Not Updated | GO to Pinpoint Test BD |
| U0420:82 | Invalid Data Received From Power Steering Control Module: Alive/Sequence Counter Incorrect/Not Updated | GO to Pinpoint Test BE |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information |
NOTE:
When DTC sets, the TPMS indicator flashes for 75 seconds then turns on. This DTC sets when the IPC receives invalid network data for the TPMS data. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the BCM and other modules on the network. REFER to: Body Control Module (BCM)
. |
| U0424:00 | Invalid Data Received From HVAC Control Module: No Sub Type Information | This DTC sets when the IPC receives unknown outside air temperature data from the HVAC module. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the PCM, HVAC module and other modules on the network. REFER to: CLIMATE CONTROL SYSTEM . |
| U0424:81 | Invalid Data Received From HVAC Control Module: Invalid Serial Data Received | This DTC sets when the IPC receives no data for the outside air temperature from the HVAC module. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the PCM, HVAC module and other modules on the network. REFER to: CLIMATE CONTROL SYSTEM . |
| U0424:82 | Invalid Data Received From HVAC Control Module: Alive/Sequence Counter Incorrect/Not Updated | GO to Pinpoint Test AY |
| U0452:81 | Invalid Data Received From Restraints Control Module: Invalid Serial Data Received | This DTC sets when the IPC receives invalid seatbelt data from the RCM. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the RCM. REFER to: Airbag Supplemental Restraint System (SRS) . |
| U0452:82 | Invalid Data Received From Restraints Control Module: Alive/Sequence Counter Incorrect/Not Updated | GO to Pinpoint Test BF |
| U045A:82 | Invalid Data Received From Parking Assist Control Module "A": Alive/Sequence Counter Incorrect/Not Updated | GO to Pinpoint Test BG |
| U046B:86 | Invalid Data Received From Global Positioning System Module: Signal Invalid | This DTC sets when the IPC receives invalid compass data from the GPSM. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the GPSM. REFER to: Information and Entertainment System . REFER to: Information and Entertainment System. |
| U0594:86 | Invalid Data Received From Hybrid/EV Powertrain Control Module: Signal Invalid | This DTC sets when the IPC receives invalid hybrid data from the SOBDMC. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the SOBDMC. Refer to ENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS (HYBRID) . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT the Programmable Module Installation (PMI) procedure as directed by the scan tool. REFER to: MODULE CONFIGURATION SYSTEM . If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC U3000:41 is retrieved again, refer to IPC HARDWARE TESTING |
| U3000:42 | Control Module: General Memory Failure | CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC U3000:42 is retrieved again, refer to IPC HARDWARE TESTING |
| U3000:44 | Control Module: Data Memory Failure | CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC U3000:44 is retrieved again, refer to IPC HARDWARE TESTING |
| U3000:46 | Control Module: Calibration/Parameter Memory Failure | CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC U3000:46 is retrieved again, refer to IPC HARDWARE TESTING |
| U3000:54 | Control Module: Missing Calibration | CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC U3000:54 is retrieved again, refer to IPC HARDWARE TESTING |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test BH |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test BI |
| U300A:64 | Ignition Switch: Signal Plausibility Failure | DTC U300A:64 sets in continuous memory when the IPC detects a messaged START input for 15 seconds or longer. Once the fault condition is detected, the IPC operates with limited functionality for 15 seconds then returns to full functionality. Diagnose the ignition start circuit to the BCM. REFER to: Steering Wheel and Column Electrical Components . |