Anti-Lock Brake System And Stability Control DTCS: SOBDMC
NOTE:
This DTC chart is applicable only to the PHEV.
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| C0001:00 | TCS Control Channel "A" Valve 1: No Sub Type Information | Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . |
| C0002:00 | TCS Control Channel "A" Valve 2: No Sub Type Information | Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . |
| C0003:00 | TCS Control Channel "B" Valve 1: No Sub Type Information | Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . |
| C0004:00 | TCS Control Channel "B" Valve 2: No Sub Type Information | Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . |
| C0021:00 | Brake Booster Performance: No Sub Type Information | Using a diagnostic scan tool, RETRIEVE and RECORD all ABS module Diagnostic Trouble Codes (DTCs). If ABS module DTC C0021:21, C0021:66 or C0021:77 is also present, GO to Pinpoint Test N If ABS module DTC C1015:64 is also present, GO to Pinpoint Test X If ABS module Diagnostic Trouble Codes (DTCs) C0021:XX and C1015:64 are present, GO to Pinpoint Test X |
| C052B:00 | ABS Pump Motor Control Range / Performance: No Sub Type Information | GO to Pinpoint Test H |
| C052C:00 | ABS Pump Motor Control Circuit / Open: No Sub Type Information | GO to Pinpoint Test H |
| C052D:00 | ABS Pump Motor Control Circuit High: No Sub Type Information | GO to Pinpoint Test H |
| C052E:00 | ABS Pump Motor Control Circuit Low: No Sub Type Information | Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . |
| C053D:00 | Brake Pressure Sensor "A" Range / Performance: No Sub Type Information | CLEAR the DTC. CYCLE the ignition from ON to OFF and back to ON. REPEAT the self-test. If DTC C053D:00 returns, VERIFY all ABS module-to- HCU fasteners are tightened to 2 NM (18 lb-in). If all fasteners are tightened to their correct torque specifications, INSTALL a new ABS module and HCU. REFER to: Hydraulic Control Unit (HCU) . Using a diagnostic scan tool, CLEAR the SOBDMC Diagnostic Trouble Codes (DTCs). |
| C0541:00 | Brake Pressure Sensor "B" Range / Performance: No Sub Type Information | CLEAR the DTC. CYCLE the ignition from ON to OFF and back to ON. REPEAT the self-test. If DTC C0541:00 returns, VERIFY all ABS module-to- HCU fasteners are tightened to 2 NM (18 lb-in). If all fasteners are tightened to their correct torque specifications, INSTALL a new ABS module and HCU. REFER to: Hydraulic Control Unit (HCU) . Using a diagnostic scan tool, CLEAR the SOBDMC Diagnostic Trouble Codes (DTCs). |
| C0560:00 | Brake Pressure Sensor Missing Calibration: No Sub Type Information | CLEAR the DTC. CYCLE the ignition from ON to OFF and back to ON. REPEAT the self-test. If DTC C0560:00 returns, VERIFY all ABS module-to- HCU fasteners are tightened to 2 NM (18 lb-in). If all fasteners are tightened to their correct torque specifications, INSTALL a new ABS module and HCU. REFER to: Hydraulic Control Unit (HCU) . Using a diagnostic scan tool, CLEAR the SOBDMC Diagnostic Trouble Codes (DTCs). |
| C0563:00 | ABS Control Module Performance: No Sub Type Information | Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . |
| C0564:00 | ABS Control Module System Voltage Low: No Sub Type Information | GO to Pinpoint Test A |
| C0565:00 | ABS Control Module System Voltage High: No Sub Type Information | GO to Pinpoint Test F |
| C0566:00 | Brake Booster Solenoid Circuit / Open: No Sub Type Information | GO to Pinpoint Test J |
| C0567:00 | Brake Booster Solenoid Circuit Low: No Sub Type Information | GO to Pinpoint Test J |
| C0568:00 | Brake Booster Solenoid Circuit High: No Sub Type Information | GO to Pinpoint Test J |
| C0569:00 | Brake Booster Solenoid Circuit Performance: No Sub Type Information | GO to Pinpoint Test J |
| C056A:00 | Brake Booster Pressure Sensor Power Supply Circuit: No Sub Type Information | The brake system pressure sensor is supplied voltage by the ABS module. The ABS module monitors this output and sets a DTC when the voltage is out or range. DIAGNOSE Diagnostic Trouble Codes (DTCs) C0564:00 and C0565:00 before diagnosing C056A:00. If DTC C0564:00 or C0565:00 is not present, VERIFY all ABS module-to- HCU fasteners are tightened to 2 NM (18 lb-in). If all fasteners are tightened to their correct torque specifications, INSTALL a new ABS module. REFER to: Anti-Lock Brake System (ABS) Module . Using a diagnostic scan tool, CLEAR the SOBDMC Diagnostic Trouble Codes (DTCs). |
| C056B:00 | Brake Pressure Sensor "A" Intermittent / Erratic: No Sub Type Information | Using a diagnostic scan tool, CARRY OUT the ABS module self-test. RETRIEVE and DIAGNOSE all ABS module Diagnostic Trouble Codes (DTCs). REFER to the DTC CHART: ANTI-LOCK BRAKE SYSTEM (ABS) MODULE . |
| C056D:00 | Brake Pedal Position Sensor Supply Voltage Circuit Low: No Sub Type Information | GO to Pinpoint Test S |
| C056E:00 | Brake Pedal Position Sensor Supply Voltage Circuit High: No Sub Type Information | GO to Pinpoint Test S |
| P050F:00 | Brake Assist Vacuum Too Low: No Sub Type Information | GO to Pinpoint Test X |
| P057A:00 | Brake Pedal Position Sensor "A" Circuit / Open: No Sub Type Information | GO to Pinpoint Test S |
| P057B:00 | Brake Pedal Position Sensor "A" Circuit Range / Performance: No Sub Type Information | GO to Pinpoint Test S |
| P057C:00 | Brake Pedal Position Sensor "A" Circuit Low: No Sub Type Information | GO to Pinpoint Test S |
| P057D:00 | Brake Pedal Position Sensor "A" Circuit High: No Sub Type Information | GO to Pinpoint Test S |
| P057E:00 | Brake Pedal Position Sensor "A" Circuit Intermittent / Erratic: No Sub Type Information | GO to Pinpoint Test S |
| P05DB:00 | Brake Pedal Position Sensor "B" Circuit / Open: No Sub Type Information | GO to Pinpoint Test S |
| P05DC:00 | Brake Pedal Position Sensor "B" Circuit Range / Performance: No Sub Type Information | GO to Pinpoint Test S |
| P05DD:00 | Brake Pedal Position Sensor "B" Circuit Low: No Sub Type Information | GO to Pinpoint Test S |
| P05DE:00 | Brake Pedal Position Sensor "B" Circuit High: No Sub Type Information | GO to Pinpoint Test S |
| P05E0:00 | Brake Pedal Position Sensor "A" / "B" Correlation: No Sub Type Information | GO to Pinpoint Test S |
| P258B:00 | Vacuum Pump Control Circuit "A" Range / Performance: No Sub Type Information | GO to Pinpoint Test T |
| U1025:00 | ABS Control Module Communication Bus Off: No Sub Type Information | HS-CAN fault was present at a point in time. The fault is not currently present since the module is communicating with the diagnostic scan tool. CLEAR the DTC. REPEAT the Network Test with the diagnostic scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information. |
| U1026:00 | ABS Control Module Lost Communication with Hybrid / EV Powertrain Control Module: No Sub Type Information | GO to Pinpoint Test AA |
| U1027:00 | ABS Control Module Lost Communication With ECM / PCM "A": No Sub Type Information | GO to Pinpoint Test I |
| U1028:00 | ABS Control Module Received Invalid Data From ECM / PCM "A": No Sub Type Information | This DTC sets when the ABS module receives invalid network data from the PCM. RETRIEVE and DIAGNOSE all Diagnostic Trouble Codes (DTCs) in the PCM. REFER to: ELECTRONIC ENGINE CONTROLS SYSTEM - 2.0L DURATEC - HYBRID (96KW/130PS) . |
| U1029:00 | ABS Control Module Received Invalid Data From Hybrid / EV Powertrain Control Module: No Sub Type Information | This DTC sets when the ABS module receives invalid network data from the Hybrid / EV PCM. RETRIEVE and REPAIR all non-network Diagnostic Trouble Codes (DTCs) in the Hybrid / EV PCM. REFER to: ELECTRONIC ENGINE CONTROLS SYSTEM - 2.0L DURATEC - HYBRID (96KW/130PS) . |
| All Other SOBDMC Diagnostic Trouble Codes (DTCs) | - | REFER to: ELECTRONIC ENGINE CONTROLS SYSTEM - 2.0L DURATEC - HYBRID (96KW/130PS) . |