Normal Operation and Fault Conditions
With the ignition ON, the IPC sends messages to the ABS module through the GWM over the HS-CAN 3. If the ABS module does not receive these messages within a certain time frame, the module sets DTCs. For information on the messages sent to the ABS module by the IPC, refer to the Network Message Chart in DESCRIPTION AND OPERATION .
PPT AR ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | Sets when the ABS module is missing any of the IPC data messages. This can be due to an IPC failure, a GWM failure, a circuit failure on the HS-CAN or an excessive load on the network. |