Central Car Configuration - Body Control Module (BCM) and Instrument Panel Cluster (IPC)
WARNING: This page is about a different car, the 2019 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Body Control Module (BCM) and IPC have a unique procedure to set Car Configuration Parameters. Configuration changes made will affect both modules. On the scan tool, first select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Retrieve the Vehicle Configuration Data. Next select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Modify and Reinstate Vehicle Configuration Data. Change parameters as needed.
| Module Name | Module Address | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Car Configuration Parameters |
|---|---|---|---|---|---|
| BCM | 726 | Yes (through Car Configuration Parameters. Refer to BCM in appropriate service information) | Yes | No |
NOTE:
Do not change car configuration parameters except those listed below. BLIS® enable/disableLoud speaker quantities (6, 9 or 10)LanguagePark assist cameraPerimeter alarm enable/disableRemote start enable/disableTire sizeTowbarTrailer moduleTrailer stability assist |
| IPC | 720 | Yes | Yes | No |