Anti-Theft System - Passive Anti-Theft System DTCS (Without Keyless Entry And Pushbutton Start): BCM

DTC INDEX

DTC	Description	Action
B10D5:94	PATS Antenna: Unexpected Operation	The BCM received an incomplete or corrupt response from the PATS transceiver. INSTALL a new PATS transceiver. REFER to: Passive Anti-Theft System (PATS) Transceiver .
B10D7:05	PATS Key: System Programming Failure	GO to Pinpoint Test B
B10D7:51	PATS Key: Not Programmed	There is an unprogrammed PATS key. PROGRAM the PATS key. REFER to: Key Programming Using Diagnostic Equipment .
B10D7:55	PATS Key: Not Configured	The BCM Configurable Engine Immobilizer (CEI) was not configured after PMI. FOLLOW the diagnostic scan tool on-screen instructions after the PMI process to perform the Configurable Engine Immobilizer (CEI) Lock Configuration.
B10D7:81	PATS Key: Invalid Serial Data Received	GO to Pinpoint Test C
B10D7:87	PATS Key: Missing Message	GO to Pinpoint Test D
B10D7:94	PATS Key: Unexpected Operation	GO to Pinpoint Test C
B10D8:00	PATS Key Less Than Minimum Programmed: No Sub Type Information	Less than 2 keys are programmed. CYCLE the customer's second key in the ignition to complete the key programming procedure (when less than 2 keys are programmed, the BCM automatically programs the first 2 keys that are cycled in the ignition lock cylinder).
B10DA:51	PATS Target Identifier: Not Programmed	There is no BCM ID stored in the BCM memory. CARRY OUT a parameter reset. REFER to: Passive Anti-Theft System (PATS) Parameter Reset .
All other Diagnostic Trouble Codes (DTCs)	-	REFER to: Body Control Module (BCM) .