All Terrain Control Module (ATCM): Removal
- 2.NOTE: The electrical connector does not have to be disconnected to position the arm rest trim panel aside.
Position the arm rest latch trim panel aside.
- 3.NOTE: It is not necessary to remove the upper finish panel to access the ATCM retaining tabs.
- 1.
Remove the upper finish panel screw.
- 2.
Lift the upper finish panel upward, releasing the rear retaining clips.
- 1.
- 4.
- 1.
Disconnect the ATCM electrical connector.
- 2.
Press and release the ATCM retaining tabs inward.
- 3.
Remove the ATCM from the upper finish panel.
- 1.