Removal & Installation
WARNING: This page is about the F-150 Lariat, 4D Pickup Crew Cab, 2.7L Eng VIN P, 4WD, which is a different variant/trim than selected.
TRANS ID - 6HP26, 6R60, 6R75, 6R80
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| V6,4WD, w/One Piece Driveshaft | | 7.5 | | C |
| V6,4WD, w/Two Piece Driveshaft | | 7.7 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Includes: Validation with use of Scan Tool. | 0.5 | | C |
| Combination Procedure: FRONT PUMP SEAL: Remove & Replace: |
| Front | | 0.3 | | B |
| Combination Procedure: OIL COOLER LINES: Flush: |
| | 0.3 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| Includes: Programming. | 2.0 | | C |
| Combination Procedure: TRANSMISSION OIL PUMP: Remove & Replace: |
| | 1.6 | | B |
TRANS ID - A10R80, 10R60, 10R80, 10R100, 10R140
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| 4WD, w/One Piece Driveshaft | | 7.5 | | C |
| 4WD, w/Two Piece Driveshaft | | 7.7 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Includes: Validation with use of Scan Tool. | 0.5 | | C |
| Combination Procedure: OIL COOLER LINES: Flush: |
| | 0.3 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: TORQUE CONVERTER HUB SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| 4WD | Includes: Programming. | 1.3 | | C |