Transmission Assembly: Remove, Install, and Overhaul
WARNING: This page is about the F-150 Lariat, 4D Pickup Crew Cab, 2.7L Eng VIN P, 4WD, which is a different variant/trim than selected.
TRANS ID - 6HP26, 6R60, 6R75, 6R80
Includes: Inspect and replace all necessary components, clean and check Converter, flush Converter and Oil Cooler Lines, adjust and road test.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| V6,4WD, w/One Piece Driveshaft | | 16.5 | | A |
| V6,4WD, w/Two Piece Driveshaft | | 16.7 | | A |
| Combination Procedure: AUTOMATIC TRANSMISSION FLUID: Drain & Refill: |
| Includes: Programming. | 1.6 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Includes: Validation with use of Scan Tool. | 0.5 | | C |
| Combination Procedure: OIL COOLER LINES: Remove & Replace: |
| Rear | | 0.5 | | C |
TRANS ID - A10R80, 10R60, 10R80, 10R100, 10R140
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| 4WD | | 16.7 | | A |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Includes: Validation with use of Scan Tool. | 0.5 | | C |
| Combination Procedure: OIL COOLER LINES: Remove & Replace: |
| Rear | | 0.5 | | C |