Recalling a Stored Memory Position

NOTE: A memory recall can be initiated only if the vehicle is in PARK or NEUTRAL gear and the ignition is not in START. A memory recall in progress will not be affected by placing the ignition in START or by moving the gearshift lever out of PARK or NEUTRAL.

NOTE: Input from the driver seat control switch, adjustable pedal control switch (if equipped), exterior mirror control switch (if equipped) or steering column control switch (if equipped) during a memory recall will abort the memory recall.

NOTE: A memory recall in progress does not prohibit the initiation of another memory recall; the most recently requested memory recall will be executed.

1.

The driver can recall the desired memory driver seat, memory exterior mirror (if equipped), memory adjustable pedal (if equipped) and memory tilt steering column (if equipped) positions by depressing either memory SET switch button 1 or 2. Depressing memory SET switch button 1 will initiate a recall of the positions stored for Memory 1. Depressing memory SET switch button 2 will initiate a recall of the positions stored for Memory 2.