Powertrain Control Module (PCM): Installation
- To install, reverse the removal procedure.
-
NOTE: This step is only necessary when installing a new component.
Upload the module information from the diagnostic tool to the module using the Programmable Modules Installation routine. Use the General Equipment: Ford Diagnostic Equipment
- Carry out the KOEO ELCM Self-Test after programming the PCM to relearn fuel system data. Refer to the instruction manual provided by the scan tool manufacturer.
-
NOTE: The step is only necessary when installing a new component.
- Carry out the Parameter Reset procedure.
- Vehicles without keyless entry and push button start. Refer to: Passive Anti-Theft System (PATS) (Hybrid/Energi) .
- Vehicles with keyless entry and push button start. Refer to: Anti-Theft Security Access and Key Programming - Scan Tool .