LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Transit Connect Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Module Communications Network) >> Diagnosis And Testing >> Communications Network >> DTC Chart - BCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Chart - BCM

WARNING: This page is about a different car, the 2016 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to: Diagnostic Methods .

DTC Chart - BCM 

DTC Description Action
U0001:88 High Speed CAN Communication Bus: Bus Off A HS-CAN fault was present at a point in time. The fault is not currently present since the module had to communicate with the diagnostic scan tool to record the DTC. CLEAR the DTC. REPEAT the network test with the diagnostic scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information.
U0010:88 Medium Speed CAN Communication Bus: Bus Off A MS-CAN fault was present at a point in time. The fault is not currently present since the module had to communicate with the diagnostic scan tool to record the DTC. CLEAR the DTC. REPEAT the network test with the diagnostic scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information.
U0037:88 Vehicle Communication Bus B: Bus Off A network fault was present at a point in time. The fault is not currently present since the module had to communicate with the diagnostic scan tool to record the DTC. CLEAR the DTC. REPEAT the network test with the diagnostic scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information.
scientia non olet · About LEMON Manuals