LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2017 >> Transit Connect Titanium >> Repair and Diagnosis >> Quick Lookups >> DTC Index >> Information System And Entertainment System DTCS >> Information and Entertainment System Vehicles With: AM/FM/CD/SYNC/Touchscreen Display DTCS >> FCIM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Information and Entertainment System Vehicles With: AM/FM/CD/SYNC/Touchscreen Display DTCS: FCIM

DTC INDEX

DTC Description Action
U0155:87 Lost Communication With Instrument Panel Cluster (IPC) Control Module: Missing Message GO to Pinpoint Test AE
U0257:87 Lost Communication With Front Controls / Display Interface Module: Missing Message GO to Pinpoint Test AJ
U2013:63 Switch Pack: Circuit/Component Protection Time-Out CLEAR the Diagnostic Trouble Codes (DTCs).
WAIT at least 10 seconds.
REPEAT the self-test.
If DTC U2013:63 is retrieved again, INSTALL a new FCIM. Refer to: Front Controls Interface Module (FCIM) .
U201A:51 Control Module Main Calibration Data: Not Programmed This DTC sets due to an incomplete or incorrect FCIM PMI. CHECK the vehicle service history for recent service actions related to the FCIM.
If there have been recent service actions with the FCIM, INSTALL as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built.
If there have been no recent service actions, the FCIM has failed to retain configuration data. INSTALL a new FCIM. Refer to: Front Controls Interface Module (FCIM) .
U3000:41 Control Module: General Checksum Failure This DTC sets due to an incomplete or incorrect FCIM PMI. CHECK the vehicle service history for recent service actions related to the FCIM.
If there have been recent service actions with the FCIM, INSTALL as-built data from PTS, following the diagnostic scan tool instructions under Module Programming>As-Built.
If there have been no recent service actions, the FCIM has failed to retain configuration data. INSTALL a new FCIM. Refer to: Front Controls Interface Module (FCIM) .
U3000:42 Control Module: General Memory Failure CLEAR the Diagnostic Trouble Codes (DTCs).
WAIT at least 10 seconds.
REPEAT the self-test.
If DTC U3000:42 is retrieved again, INSTALL a new FCIM. Refer to: Front Controls Interface Module (FCIM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to Pinpoint Test AK
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to Pinpoint Test AL