Section 35 (Side And Rear Vision System)
WARNING: This page is about a different car, the 2017 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Blind Spot Information System - Component Location
- Blind Spot Information System - Overview
- Blind Spot Information System - System Operation and Component Description
- System Operation
- BLIS ® and CTA
- Network Message Chart - Vehicles Without Door Modules
- ACM Network Input Messages
- DSP Network Input Messages
- SODL Network Input Messages
- SODR Network Input Messages
- System Diagram - Vehicles With Door Modules
- Network Message Chart - Vehicles With Door Modules
- DDM Network Input Messages
- PDM Network Input Messages
- BLIS ®
- Circumstances that cause missed alerts are:
- CTA System
- CTA detection zones:
- Circumstances that may cause non-detection are:
- Exterior Mirror Indication - Vehicles Without Door Modules
- Exterior Mirror Indication - Vehicles With Door Modules
- BLIS ® and CTA Message Center Function
- Blocked Sensor
- Component Description
- System Operation
- Diagnosis And Testing
- Blind Spot Information System
- DTC Chart(s)
- Symptom Chart(s)
- Pinpoint Tests
- Pinpoint Test A : The BLIS (Blind Spot Information System) ® Is Inoperative Or Does Not Function Correctly
- Pinpoint Test B : The CTA (Cross Traffic Alert) System Is Inoperative Or Does Not Function Correctly
- Pinpoint Test C : An Exterior Mirror BLIS (Blind Spot Information System) ®/ CTA (Cross Traffic Alert) Led (Light Emitting Diode) Is Always On (Without Door Modules)
- Pinpoint Test D : An Exterior Mirror BLIS (Blind Spot Information System) ®/ CTA (Cross Traffic Alert) Led (Light Emitting Diode) Is Always On (With Door Modules)
- Pinpoint Test E : An Exterior Mirror BLIS (Blind Spot Information System) ®/ CTA (Cross Traffic Alert) Led (Light Emitting Diode) Is Inoperative (Without Door Modules)
- Pinpoint Test F : An Exterior Mirror BLIS (Blind Spot Information System) ®/ CTA (Cross Traffic Alert) Led (Light Emitting Diode) Is Inoperative (With Door Modules)
- Pinpoint Test G : The IPC (Instrument Panel Cluster) Message Center Displays A Blocked Sensor Message
- Pinpoint Test H : The BLIS (Blind Spot Information System) ® And CTA (Cross Traffic Alert) System Cannot Be Turned Off In The Message Center
- Pinpoint Test I : DTC (Diagnostic Trouble Code) U0100:00, DTC (Diagnostic Trouble Code) U0101:00
- Pinpoint Test J : DTC (Diagnostic Trouble Code) U0121:00
- Pinpoint Test K : DTC (Diagnostic Trouble Code) U0140:00
- Blind Spot Information System
- Removal And Installation