| 41 |
INSTALL a new OCS sensor. Refer to appropriate SUPPLEMENTAL RESTRAINT SYSTEM article |
| 42 |
INSTALL a new OCS sensor. Refer to appropriate SUPPLEMENTAL RESTRAINT SYSTEM article |
| 46 |
INSTALL a new OCS sensor. Refer to appropriate SUPPLEMENTAL RESTRAINT SYSTEM article |
| 54 |
Using a diagnostic scan tool, CARRY OUT the OCS Reset. FOLLOW all instructions on the diagnostic scan tool. If the OCS Reset was not successful, VERIFY correct installation of the OCS. VERIFY the pressure sensor hose is correctly routed and CORRECT the installation as necessary. REPEAT the self-test. If DTC U3000:54 is still present, INSTALL a new OCS sensor. Refer to appropriate SUPPLEMENTAL RESTRAINT SYSTEM article |