Removal And Installation: Generator: Installation

Radial arm installation only 

1. 1. Tighten to 9 Nm (80 lb-in).
   2. Tighten to 17 Nm (150 lb-in).

   Courtesy of FORD MOTOR COMPANY

   All vehicles 

   Courtesy of FORD MOTOR COMPANY

2. • Tighten to 8 Nm (71 lb-in).

   Courtesy of FORD MOTOR COMPANY

3. • Tighten to 47 Nm (35 lb-ft).

   Courtesy of FORD MOTOR COMPANY

4. • Tighten to 47 Nm (35 lb-ft).

   Courtesy of FORD MOTOR COMPANY

5. • Tighten to 17 Nm (150 lb-in).

   Courtesy of FORD MOTOR COMPANY

   Vehicles equipped with a 3.5L GTDI engine 

6. Install the A/C compressor. Refer to Climate Control .

   Vehicles equipped with a 3.5L Ti-VCT engine 

   Courtesy of FORD MOTOR COMPANY

7. Install the cooling fan assembly. Refer to Engine Cooling .

   All vehicles 

8. Connect the battery cable. Refer to Charging System (Battery, Battery Mounting And Battery Cables) .