LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Focus ST >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Abs Guided Routine Testing >> Pinpoint Tests >> Pinpoint Test AP: ABS Overheat Concern With CCM >> Possible Causes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Possible Causes

  1. AP1: 
    • Ignition ON, engine OFF.
    • Carry out the ABS self-test.
    • Carry out the C-CM self-test.
    • Are any DTCs besides C0072:xx present? 
    Yes No
    DIAGNOSE all other DTCs first. Go to  AP2.
  2. AP2: RECHECK DTC C0072:XX 
    • Ignition OFF.
    • Allow the vehicle to cool for 30 minutes.
    • Ignition ON, engine OFF.
    • Carry out the ABS self-test.
    • Carry out the C-CM self-test.
    • Is DTC C0072:xx still present? 
    Yes No
    INSTALL a new CCM. REFER to CRUISE CONTROL (EXCEPT ELECTRIC) . The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition.