Pinpoint Test O: The Traction Control System Is Inoperative Or Cannot Be Disabled Using The Traction Control Switch: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Refer to INSTRUMENT CLUSTER Wiring Diagrams for schematic and connector information.

CAUTION: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may cause damage to the connector.

NOTE: If equipped, MyKey allows users to configure traction control to be either always on or selectable. If a MyKey restricted key is in use with the MyKey traction control feature configured to always on, traction control cannot be disabled. An admin key must be used to enable and disable traction control.

NOTE: This test requires the use of at least 2 ignition keys (passive or IKT) programmed to the vehicle; one admin ignition key and one restricted ignition key.