Section 103 (Module Communications Network)
WARNING: This page is about a different car, the 2018 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Diagnosis And Testing
- Communications Network
- DTC Chart
- Symptom Chart(s)
- Pinpoint Tests
- Pinpoint Test A : The Powertrain Control Module (Pcm) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test B : The Anti-Lock Brake System (Abs) Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test C : The Restraints Control Module (RCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test D : The BECMB (Battery Energy Control Module B) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test E : The Occupant Classification System Module (OCSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test F : The Steering Column Control Module (SCCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test G : The Instrument Panel Cluster (IPC) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test H : The Body Control Module (BCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test I : The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test J : The Front Controls Interface Module (FCIM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test K : The Audio Control Module (ACM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test L : The Front Control/Display Interface Module (FCDIM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test M : The Heated Steering Wheel Module (HSWM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test N : The Image Processing Module A (IPMA) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test O : The Image Processing Module B (IPMB) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test P : The Global Positioning System Module (GPSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Q : The Accessory Protocol Interface Module (APIM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test R : The DSP (Audio Digital Signal Processing Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test S : The Radio Transceiver Module (RTM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test T : The Power Steering Control Module (PSCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test U : The Driver Seat Module (DSM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test V : The SCME (Front Seat Climate Control Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test W : The Driver Door Module (DDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test X : The Passenger Door Module (PDM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Y : The Side Obstacle Detection Control Module LH (Sod-L) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Z : The Side Obstacle Detection Control Module RH (Sod-R) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Aa : The Cruise Control Module (CCM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ab : The Head Up Display (HUD) Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ac : The Rear Gate Trunk Module (RGTM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ad : The TRM (Trailer Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AE : The Steering Effort Control Module (SECM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test AF : The SASM (Steering Angle Sensor Module) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ag : The Gateway Module (GWM) Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ah : No High Speed Controller Area Network 1 (HS-Can1) Communication, All Modules Are Not Responding
- Pinpoint Test Ai : No High Speed Controller Area Network 2 (HS-Can2) Communication, All Modules Are Not Responding
- Pinpoint Test AJ : No High Speed Controller Area Network 3 (HS-Can3) Communication, All Modules Are Not Responding
- Pinpoint Test AK : No Medium Speed Controller Area Network (Ms-Can) Communication, All Modules Are Not Responding
- Pinpoint Test Al : No Power To The Data Link Connector (DLC)
- Communications Network
- General Procedures
- Removal And Installation