LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Transit Connect Titanium >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> RCM Guided Routine Testing -- (Pinpoint Tests A - Ax) >> DTC/Symptom Selection >> DTC Index >> OCS - Occupant Classification System >> DTC U3000: Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U3000: Control Module

Failure Action
41 INSTALL a new OCS sensor. REFER to the appropriate Removal and Installation procedure in Supplemental Restraint System article
42 INSTALL a new OCS sensor. REFER to the appropriate Removal and Installation procedure in Supplemental Restraint System article
46 INSTALL a new OCS sensor. REFER to the appropriate Removal and Installation procedure in Supplemental Restraint System article
54 Using a diagnostic scan tool, CARRY OUT the OCS Reset. FOLLOW all instructions on the diagnostic scan tool. If the OCS Reset was not successful, VERIFY correct installation of the OCS. VERIFY the pressure sensor hose is correctly routed and CORRECT the installation as necessary. REPEAT the self-test. If DTC U3000:54 is still present, INSTALL a new OCS sensor. REFER to the appropriate Removal and Installation procedure in Supplemental Restraint System article
scientia non olet · About LEMON Manuals