LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Transit Connect Titanium >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Abs Guided Routine Testing >> Pinpoint Tests >> Pinpoint Tests Z: ABS Module Configuration Concern >> Normal Operation and Fault Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation and Fault Conditions

During new module installation, configuration files are loaded into the new module being replaced. If a discrepancy is detected between the modules or an incomplete programming procedure is carried out, a DTC sets. 

PPT Z ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0300:51 Internal Control Module Software Incompatibility: Not Programmed This DTC sets when the software release level has not been programmed into the module. This is most likely due to incomplete or improper module programming procedures.
U2016:47 Control Module Main Software: Watchdog/Safety Micro-Controller Failure Sets due to incomplete or improper module programming procedures.
U2100:00 Initial Configuration Not Complete: No Sub Type Information Sets due to incomplete or improper module programming procedures.
U2101:00 Control Module Configuration Incompatible: No Sub Type Information Sets due to incomplete or improper module programming procedures.
U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information Sets due to incomplete or improper module programming procedures.
PPT Z SASM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U2016:47 Control Module Main Software: Watchdog/Safety Micro-Controller Failure Sets due to incomplete or improper module programming procedures.
U2100:00 Initial Configuration Not Complete: No Sub Type Information Sets due to incomplete or improper module programming procedures.
scientia non olet · About LEMON Manuals