Information and Entertainment System Vehicles With: AM/FM/CD/SYNC/Touchscreen Display: APIM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B108E:01 | Display: General Electrical Failure | GO to Pinpoint Test V |
| B108E:63 | Display: Circuit / Component Protection Time-Out | GO to Pinpoint Test V |
| B119F:01 | GPS Antenna: General Electrical Failure | For a SIRIUS Travel Link concern (if equipped), GO to Pinpoint Test C For a navigation concern (if equipped), GO to Pinpoint Test Y For a compass concern, GO to Pinpoint Test Z |
| B119F:13 | GPS Antenna: Circuit Open | For a SIRIUS Travel Link concern (if equipped), GO to Pinpoint Test C For a navigation concern (if equipped), GO to Pinpoint Test Y For a compass concern, GO to Pinpoint Test Z |
| B11BA:1C | Steering Wheel Audio Switch Pack: Circuit Voltage Out of Range | GO to Pinpoint Test T |
| B11BA:63 | Steering Wheel Audio Switch Pack: Circuit / Component Protection Time-Out | GO to Pinpoint Test T |
| B1252:11 | USB Port: Circuit Short To Ground | GO to Pinpoint Test Q |
| B1252:13 | USB Port: Circuit Open | GO to Pinpoint Test Q |
| B12B8:11 | USB Port #2: Circuit Short To Ground |
NOTE:
This DTC refers to USB port #2 on the APIM itself, which is not used. INSPECT the APIM USB port #2 for damage and remove any debris. CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC B12B8:11 is retrieved again, Refer to APIM Guided Routine Testing
. |
| B14FD:11 | External Media Control Connectivity: Circuit Short To Ground | GO to Pinpoint Test Q |
| B1D79:11 | Microphone Input: Circuit Short To Ground | GO to Pinpoint Test P |
| B1D79:12 | Microphone Input: Circuit Short To Battery | GO to Pinpoint Test P |
| B1D79:13 | Microphone Input: Circuit Open | GO to Pinpoint Test P |
| C1001:01 | Vision System Camera: General Electrical Failure | REFER to: Parking Aid - System Operation and Component Description . |
| U0121:00 | Lost Communication With Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | GO to Pinpoint Test AB |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test AC |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to Pinpoint Test AD |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to Pinpoint Test AE |
| U0159:00 | Lost Communication With Parking Assist Control Module "A": No Sub Type Information | GO to Pinpoint Test AF |
| U0162:00 | Lost Communication With Navigation Display Module: No Sub Type Information | GO to Pinpoint Test V |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to Pinpoint Test AG |
| U0256:00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to Pinpoint Test AI |
| U0415:00 | Invalid Data Received From Anti-Lock Brake System (ABS) Control Module: No Sub Type Information | RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the ABS module. REFER to: Anti-Lock Brake System (ABS) and Stability Control
. If no Diagnostic Trouble Codes (DTCs) are present in the ABS module, DIAGNOSE the observable symptom. |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information | RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the BCM. REFER to: Body Control Module (BCM)
. If no Diagnostic Trouble Codes (DTCs) are present in the BCM, DIAGNOSE the observable symptom. |
| U0423:00 | Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information | RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the IPC. REFER to: Instrumentation, Message Center and Warning Chimes . |
| U0452:00 | Invalid Data Received From Restraints Control Module: No Sub Type Information | RETRIEVE and FOLLOW Diagnostic Trouble Codes (DTCs) present in the RCM. REFER to: Airbag Supplemental Restraint System (SRS)
. If no Diagnostic Trouble Codes (DTCs) are present in the RCM, DIAGNOSE the observable symptom. |
| U1A00:87 | Private Communication Network: Missing Message | For a satellite radio concern, GO to Pinpoint Test B For a SIRIUS Travel Link concern, GO to Pinpoint Test C For a navigation concern (if equipped), GO to Pinpoint Test Y For a compass concern, GO to Pinpoint Test Z |
| U2017:45 | Control Module Software #2: Program Memory Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U2017:45 is retrieved again, Refer to APIM Guided Routine Testing . |
| U2017:51 | Control Module Software #2: Not Programmed | This DTC sets due to incomplete or incorrect APIM programming/provisioning. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming. REFER to: SYNC Module [APIM] Programming . If there have been no recent service actions, the APIM has failed to retain configuration data. Refer to APIM Guided Routine Testing . |
| U2017:52 | Control Module Software #2: Not Activated | This DTC sets due to incomplete or incorrect APIM programming/provisioning. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming. REFER to: SYNC Module [APIM] Programming . If there have been no recent service actions, the APIM has failed to retain configuration data. Refer to APIM Guided Routine Testing . |
| U2017:54 | Control Module Software #2: Missing Calibration | This DTC sets due to incomplete or incorrect APIM programming/provisioning. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming. REFER to: SYNC Module [APIM] Programming . If there have been no recent service actions, the APIM has failed to retain configuration data. Refer to APIM Guided Routine Testing . |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC sets due to incomplete or incorrect APIM programming/provisioning. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming. REFER to: SYNC Module [APIM] Programming . If there have been no recent service actions, the APIM has failed to retain configuration data. Refer to APIM Guided Routine Testing . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | This DTC sets due to incomplete or incorrect APIM programming/provisioning. CHECK the vehicle service history for recent service actions related to the APIM. If there have been recent service actions with the APIM, REPEAT/PERFORM the APIM programming. REFER to: SYNC Module [APIM] Programming . If there have been no recent service actions, the APIM has failed to retain configuration data. Refer to APIM Guided Routine Testing . |
| U3000:04 | Control Module: System Internal Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:04 is retrieved again, Refer to APIM Guided Routine Testing . |
| U3000:09 | Control Module: Component Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:09 is retrieved again, Refer to APIM Guided Routine Testing . |
| U3000:41 | Control Module: General Checksum Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the self-test. If DTC U3000:41 is retrieved again, Refer to APIM Guided Routine Testing . |
| U3000:88 | Control Module: Bus Off |
NOTE:
The module was unable to communicate on the network at a point in time. The fault is not currently present since the module had to communicate with the diagnostic scan tool to report this DTC. To avoid repeat network concerns: INSPECT for damaged or corroded wiring at the APIM. Refer to Module Communications Network
for schematic and connector information.CLEAR the DTC.WAIT at least 10 seconds.REPEAT the network test with the diagnostic scan tool. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to Pinpoint Test AK |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to Pinpoint Test AL |