Diagnostic Aids

The PSCM reporting only DTC B1D23:4B does not indicate a fault in the PSCM. It indicates an over-temperature condition due to ambient conditions or a heavy load on the EPAS system. An example of a heavy load would be multiple parking lot maneuvers over a short duration of time with low tire pressure or towing for long distances followed by multiple parking maneuvers.

The thermistor used by the PSCM is calibrated for 80°C (176°F) and as ambient temperature decreases, so does the accuracy of the sensor. At room temperature and lower, the sensor is +/- 20°C (68°F).

The presence of DTC B1D23:4B prevents the active park assist system (if equipped) from activating. If set during an active park assist event, the event is terminated and the active park assist system is deactivated.