Pinpoint Tests Purpose

To verify PSCM DTC P160C is present and provide diagnostics if DTC P160C is currently active in the PSCM.

1. BF1: VERIFY THE PSCM DTC 
   • Ignition ON, engine OFF.
   • Clear the PSCM DTCs.
   • Ignition OFF.
   • Wait at least 90 seconds for the modules to completely shut off.
   • Ignition ON, engine OFF.
   • Carry out the PSCM self-test.
   • Is DTC P160C present and active in the PSCM? 

   Yes	No
   INSTALL a new EPAS gear. REFER to Power Steering article ORDER a replacement EPAS gear and INCLUDE the RVC on the form. If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.	If the PSCM does not list DTC P160C, DISCONTINUE this test and REFER to the DTC Index  for direction.