Normal Operation and Fault Conditions
The ABS module carries out self tests during operation, the module also monitors various inputs and compares the values to what should be expected. If the values received are out of range, are not what is expected, or if any of the self tests fail, the ABS module sets a DTC.
PPT Y ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| C0001:01 | TCS Control Channel "A" Valve 1: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C0002:01 | TCS Control Channel "A" Valve 2: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C0003:01 | TCS Control Channel "B" Valve 1: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C0004:01 | TCS Control Channel "B" Valve 2: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C0010:01 | Left Front Inlet Control: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C0011:01 | Left Front Outlet Control: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C0014:01 | Right Front Inlet Control: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C0015:01 | Right Front Outlet Control: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C0018:01 | Left Rear Inlet Control: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C0019:01 | Left Rear Outlet Control: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C001C:01 | Right Rear Inlet Control: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| C001D:01 | Right Rear Outlet Control: General Electrical Failure | Sets when the ABS module detects an internal fault. |
| U2007:49 | Valve(s): Internal Electronic Failure | This DTC sets due to an electrical failure (open circuit, short to ground, short to voltage) in one or more of the HCU valve coils. |
| U3000:49 | Control Module: Internal Electronic Failure | Sets when the ABS module detects an internal fault. |