LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2019 >> Escape Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Module Communications Network) >> Diagnosis And Testing >> Communications Network >> DTC Chart >> BCM DTC Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

BCM DTC Chart

WARNING: This page is about a different car, the 2017 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
DTC Description Action
U0001:88 High Speed CAN Communication Bus: Bus Off A HS-CAN fault was present at a point in time. The fault is not currently present since the module is communicating with the diagnostic scan tool. CLEAR the DTC. REPEAT the network test with the diagnostic scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information.
U0010:88 Medium Speed CAN Communication Bus: Bus Off A MS-CAN fault was present at a point in time. The fault is not currently present since the module is communicating with the diagnostic scan tool. CLEAR the DTC. REPEAT the network test with the diagnostic scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information.
U0037:88 Vehicle Communication Bus B: Bus Off An fault is present on the extended MS-CAN and the BCM is not communicating with the SODL and SODR. CLEAR the DTC. REPEAT the network test with the diagnostic scan tool. VERIFY the integrity of the connectors and wiring. Refer to Module Communications Network for schematic and connector information. If a communication concern is still present, GO to Pinpoint Test P