| Ignition status |
BCM |
This message is used to communicate ignition status, which is used for initiating the easy entry/easy exit feature. |
| Personality recall |
BCM |
When the personality recall command is received from the BCM, the DSM stores or recalls the steering wheel position. If a RKE transmitter has been programmed to a memory position, this input is used to recall the steering column position. |
| Steering column position switch status |
SCCM |
Message to control the adjustable steering column when the steering column control switch is pressed. The message is transmitted from the SCCM to the DSM via the GWM. |
| Memory seat switch status |
DDM |
When the memory set switch (1, 2 or 3) is activated, the DDM sends this message to the DSM which then stores or recalls the corresponding memory seat position. |