Section 223 (Climate Control)
WARNING: This page is about a different car, the 2018 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Removal And Installation
- Air Conditioning (A C) Compressor 3.5L GTDI, 3.5L Ti-VCT
- Air Inlet Duct
- Ambient Air Temperature Sensor
- Blower Motor
- Blower Motor Speed Control
- Cabin Air Filter
- Compressor To Condenser Discharge Line 3.5L Ti-VCT
- Compressor To Condenser Discharge Line 3.5L GTDI
- Condenser Core 3.5L Ti-VCT
- Condenser Core 3.5L GTDI
- Evaporator Core
- Heater Core
- Heater Core And Evaporator Core Housing
- Heating Ventilation Air Conditioning (HVAC) Module
- In-Vehicle Temperature And Humidity Sensor
- Mode Door Actuator Air Inlet Door
- Mode Door Actuator Defrost Panel Floor Door
- Receiver Drier
- Receiver Drier Cartridge
- Register Center
- Register Driver Side
- Register Passenger Side
- Temperature Blend Door Actuator LH
- Temperature Blend Door Actuator RH
- Thermostatic Expansion Valve
- Thermostatic Expansion Valve Manifold And Tube Assembly 3.5L GTDI
- Thermostatic Expansion Valve Manifold And Tube Assembly 3.5L Ti-VCT